This page uses content from Wikipedia and is licensed under CC BY-SA.


IUPAC name
Other names
Fluorinert FC-72,
Flutec PP1,
Perfluoro-compound FC-72
3D model (JSmol)
Abbreviations PFH
ECHA InfoCard 100.005.987
Molar mass 338.041845
Density 1.691
Melting point −90 °C (−130 °F; 183 K)
Boiling point 56 °C (133 °F; 329 K)
Vapor pressure 27kPa @ 25 °C
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☑Y verify (what is ☑Y☒N ?)
Infobox references

Perfluorohexane (C6F14), or tetradecafluorohexane, is a fluorocarbon. It is a derivative of hexane in which all of the hydrogen atoms are replaced by fluorine atoms. It is used in one formulation of the electronic cooling liquid/insulator Fluorinert for low-temperature applications due to its low boiling point of 56 °C and freezing point of −90 °C. It is odorless and colorless. Unlike typical hydrocarbons, the structure features a helical carbon backbone.[1]

Oxygen solubility

Because it is biologically inert and chemically stable, perfluorohexane has attracted attention in medicine. Like other fluorocarbons, perfluorohexane dissolves gases, including oxygen from the air, to a higher concentration than ordinary organic solvents. This effect is attributed to the weak intermolecular forces between perfluorohexane molecules, which allows "space" for gas molecules to partition into the liquid. Animals can be submerged in a bath of perfluorohexane without drowning, as there is sufficient oxygen available in the solvent to allow respiration to continue. This effect has led to the experimental use of perfluorohexane in treating burn victims, as their lungs can be filled with either perfluorohexane vapor or in extreme cases liquid perfluorohexane, allowing breathing to continue without the problems normally seen with pulmonary edema that sometimes occur when the inside of the lungs have been burnt e.g. by inhalation of hot smoke.[2][3]


  1. ^ John A. Gladysz and Markus Jurisch "Structural, Physical, and Chemical Properties of Fluorous Compounds" in István T. Horváth (Ed.) Topics in Current Chemistry 2011 "Fluorous Chemistry" doi:10.1007/128_2011_282
  2. ^ De Abreu, MG; Quelhas, AD; Spieth, P; Brauer, G; Knels, L; Kasper, M; Pino, AV; Bleyl, JU; Hubler, M; Bozza, F; Salluh, J; Kuhlisch, E; Giannella-Neto, A; Koch, T (Feb 2006). "Comparative effects of vaporized perfluorohexane and partial liquid ventilation in oleic acid-induced lung injury". Anesthesiology. 104 (2): 278–89. doi:10.1097/00000542-200602000-00013.
  3. ^ Bleyl, JU; Ragaller, M; Tscho, U; Regner, M; Hubler, M; Kanzow, M; Vincent, O; Albrecht, M (Jun 2002). "Changes in pulmonary function and oxygenation during application of perfluorocarbon vapor in healthy and oleic acid-injured animals". Critical Care Medicine. 30 (6): 1340–7. doi:10.1097/00003246-200206000-00034.