Nuclear physics |
---|
Nucleus · Nucleons (p, n) · Nuclear matter · Nuclear force · Nuclear structure · Nuclear reaction |
Nuclear stability |
High-energy processes |
Nuclear fusion Processes: Stellar · Big Bang · Supernova Nuclides: Primordial · Cosmogenic · Artificial |
Alvarez · Becquerel · Bethe · A. Bohr · N. Bohr · Chadwick · Cockcroft · Ir. Curie · Fr. Curie · Pi. Curie · Skłodowska-Curie · Davisson · Fermi · Hahn · Jensen · Lawrence · Mayer · Meitner · Oliphant · Oppenheimer · Proca · Purcell · Rabi · Rutherford · Soddy · Strassmann · Świątecki · Szilárd · Teller · Thomson · Walton · Wigner |
Understanding the structure of the atomic nucleus is one of the central challenges in nuclear physics.
The liquid drop model is one of the first models of nuclear structure, proposed by Carl Friedrich von Weizsäcker in 1935.^{[1]} It describes the nucleus as a semiclassical fluid made up of neutrons and protons, with an internal repulsive electrostatic force proportional to the number of protons. The quantum mechanical nature of these particles appears via the Pauli exclusion principle, which states that no two nucleons of the same kind can be at the same state. Thus the fluid is actually what is known as a Fermi liquid. In this model, the binding energy of a nucleus with protons and neutrons is given by
where is the total number of nucleons (Mass Number). The terms proportional to and represent the volume and surface energy of the liquid drop, the term proportional to represents the electrostatic energy, the term proportional to represents the Pauli exclusion principle and the last term is the pairing term, which lowers the energy for even numbers of protons or neutrons. The coefficients and the strength of the pairing term may be estimated theoretically, or fit to data. This simple model reproduces the main features of the binding energy of nuclei.
The assumption of nucleus as a drop of Fermi liquid is still widely used in the form of Finite Range Droplet Model (FRDM), due to the possible good reproduction of nuclear binding energy on the whole chart, with the necessary accuracy for predictions of unknown nuclei.^{[2]}
The expression "shell model" is ambiguous in that it refers to two different eras in the state of the art. It was previously used to describe the existence of nucleon shells in the nucleus according to an approach closer to what is now called mean field theory. Nowadays, it refers to a formalism analogous to the configuration interaction formalism used in quantum chemistry. We shall introduce the latter here.
Systematic measurements of the binding energy of atomic nuclei show systematic deviations with respect to those estimated from the liquid drop model. In particular, some nuclei having certain values for the number of protons and/or neutrons are bound more tightly together than predicted by the liquid drop model. These nuclei are called singly/doubly magic. This observation led scientists to assume the existence of a shell structure of nucleons (protons and neutrons) within the nucleus, like that of electrons within atoms.
Indeed, nucleons are quantum objects. Strictly speaking, one should not speak of energies of individual nucleons, because they are all correlated with each other. However, as an approximation one may envision an average nucleus, within which nucleons propagate individually. Owing to their quantum character, they may only occupy discrete energy levels. These levels are by no means uniformly distributed; some intervals of energy are crowded, and some are empty, generating a gap in possible energies. A shell is such a set of levels separated from the other ones by a wide empty gap.
The energy levels are found by solving the Schrödinger equation for a single nucleon moving in the average potential generated by all other nucleons. Each level may be occupied by a nucleon, or empty. Some levels accommodate several different quantum states with the same energy; they are said to be degenerate. This occurs in particular if the average nucleus has some symmetry.
The concept of shells allows one to understand why some nuclei are bound more tightly than others. This is because two nucleons of the same kind cannot be in the same state (Pauli exclusion principle). So the lowest-energy state of the nucleus is one where nucleons fill all energy levels from the bottom up to some level. A nucleus with full shells is exceptionally stable, as will be explained.
As with electrons in the electron shell model, protons in the outermost shell are relatively loosely bound to the nucleus if there are only few protons in that shell, because they are farthest from the center of the nucleus. Therefore, nuclei which have a full outer proton shell will be more tightly bound and have a higher binding energy than other nuclei with a similar total number of protons. All this is also true for neutrons.
Furthermore, the energy needed to excite the nucleus (i.e. moving a nucleon to a higher, previously unoccupied level) is exceptionally high in such nuclei. Whenever this unoccupied level is the next after a full shell, the only way to excite the nucleus is to raise one nucleon across the gap, thus spending a large amount of energy. Otherwise, if the highest occupied energy level lies in a partly filled shell, much less energy is required to raise a nucleon to a higher state in the same shell.
Some evolution of the shell structure observed in stable nuclei is expected away from the valley of stability. For example, observations of unstable isotopes have shown shifting and even a reordering of the single particle levels of which the shell structure is composed.^{[3]} This is sometimes observed as the creation of an island of inversion or in the reduction of excitation energy gaps above the traditional magic numbers.
Some basic hypotheses are made in order to give a precise conceptual framework to the shell model:
The general process used in the shell model calculations is the following. First a Hamiltonian for the nucleus is defined. Usually, for computational practicality, only one- and two-body terms are taken into account in this definition. The interaction is an effective theory: it contains free parameters which have to be fitted with experimental data.
The next step consists in defining a basis of single-particle states, i.e. a set of wavefunctions describing all possible nucleon states. Most of the time, this basis is obtained via a Hartree–Fock computation. With this set of one-particle states, Slater determinants are built, that is, wavefunctions for Z proton variables or N neutron variables, which are antisymmetrized products of single-particle wavefunctions (antisymmetrized meaning that under exchange of variables for any pair of nucleons, the wavefunction only changes sign).
In principle, the number of quantum states available for a single nucleon at a finite energy is finite, say n. The number of nucleons in the nucleus must be smaller than the number of available states, otherwise the nucleus cannot hold all of its nucleons. There are thus several ways to choose Z (or N) states among the n possible. In combinatorial mathematics, the number of choices of Z objects among n is the binomial coefficient C^{Z}
_{n}. If n is much larger than Z (or N), this increases roughly like n^{Z}. Practically, this number becomes so large that every computation is impossible for A=N+Z larger than 8.
To obviate this difficulty, the space of possible single-particle states is divided into a core and a valence shell, by analogy with chemistry. The core is a set of single-particles which are assumed to be inactive, in the sense that they are the well bound lowest-energy states, and that there is no need to reexamine their situation. They do not appear in the Slater determinants, contrary to the states in the valence space, which is the space of all single-particle states not in the core, but possibly to be considered in the choice of the build of the (Z-) N-body wavefunction. The set of all possible Slater determinants in the valence space defines a basis for (Z-) N-body states.
The last step consists in computing the matrix of the Hamiltonian within this basis, and to diagonalize it. In spite of the reduction of the dimension of the basis owing to the fixation of the core, the matrices to be diagonalized reach easily dimensions of the order of 10^{9}, and demand specific diagonalization techniques.
The shell model calculations give in general an excellent fit with experimental data. They depend however strongly on two main factors:
The interaction between nucleons, which is a consequence of strong interactions and binds the nucleons within the nucleus, exhibits the peculiar behaviour of having a finite range: it vanishes when the distance between two nucleons becomes too large; it is attractive at medium range, and repulsive at very small range. This last property correlates with the Pauli exclusion principle according to which two fermions (nucleons are fermions) cannot be in the same quantum state. This results in a very large mean free path predicted for a nucleon within the nucleus.^{[4]}
The main idea of the Independent Particle approach is that a nucleon moves inside a certain potential well (which keeps it bound to the nucleus) independently from the other nucleons. This amounts to replacing an N-body problem (N particles interacting) by N single-body problems. This essential simplification of the problem is the cornerstone of mean field theories. These are also widely used in atomic physics, where electrons move in a mean field due to the central nucleus and the electron cloud itself.
The independent particle model and mean field theories (we shall see that there exist several variants) have a great success in describing the properties of the nucleus starting from an effective interaction or an effective potential, thus are a basic part of atomic nucleus theory. One should also notice that they are modular enough, in that it is quite easy to extend the model to introduce effects such as nuclear pairing, or collective motions of the nucleon like rotation, or vibration, adding the corresponding energy terms in the formalism. This implies that in many representations, the mean field is only a starting point for a more complete description which introduces correlations reproducing properties like collective excitations and nucleon transfer.^{[5]}^{[6]}
A large part of the practical difficulties met in mean field theories is the definition (or calculation) of the potential of the mean field itself. One can very roughly distinguish between two approaches:
In the case of the Hartree–Fock approaches, the trouble is not to find the mathematical function which describes best the nuclear potential, but that which describes best the nucleon–nucleon interaction. Indeed, in contrast with atomic physics where the interaction is known (it is the Coulomb interaction), the nucleon–nucleon interaction within the nucleus is not known analytically.
There are two main reasons for this fact. First, the strong interaction acts essentially among the quarks forming the nucleons. The nucleon–nucleon interaction in vacuum is a mere consequence of the quark–quark interaction. While the latter is well understood in the framework of the Standard Model at high energies, it is much more complicated in low energies due to color confinement and asymptotic freedom. Thus there is yet no fundamental theory allowing one to deduce the nucleon–nucleon interaction from the quark–quark interaction. Furthermore, even if this problem were solved, there would remain a large difference between the ideal (and conceptually simpler) case of two nucleons interacting in vacuum, and that of these nucleons interacting in the nuclear matter. To go further, it was necessary to invent the concept of effective interaction. The latter is basically a mathematical function with several arbitrary parameters, which are adjusted to agree with experimental data.
Most modern interaction are zero-range so they act only when the two nucleons are in contact, as introduced by Tony Skyrme.^{[7]}
In the Hartree–Fock approach of the n-body problem, the starting point is a Hamiltonian containing n kinetic energy terms, and potential terms. As mentioned before, one of the mean field theory hypotheses is that only the two-body interaction is to be taken into account. The potential term of the Hamiltonian represents all possible two-body interactions in the set of n fermions. It is the first hypothesis.
The second step consists in assuming that the wavefunction of the system can be written as a Slater determinant of one-particle spin-orbitals. This statement is the mathematical translation of the independent-particle model. This is the second hypothesis.
There remains now to determine the components of this Slater determinant, that is, the individual wavefunctions of the nucleons. To this end, it is assumed that the total wavefunction (the Slater determinant) is such that the energy is minimum. This is the third hypothesis.
Technically, it means that one must compute the mean value of the (known) two-body Hamiltonian on the (unknown) Slater determinant, and impose that its mathematical variation vanishes. This leads to a set of equations where the unknowns are the individual wavefunctions: the Hartree–Fock equations. Solving these equations gives the wavefunctions and individual energy levels of nucleons, and so the total energy of the nucleus and its wavefunction.
This short account of the Hartree–Fock method explains why it is called also the variational approach. At the beginning of the calculation, the total energy is a "function of the individual wavefunctions" (a so-called functional), and everything is then made in order to optimize the choice of these wavefunctions so that the functional has a minimum – hopefully absolute, and not only local. To be more precise, there should be mentioned that the energy is a functional of the density, defined as the sum of the individual squared wavefunctions. Let us note also that the Hartree–Fock method is also used in atomic physics and condensed matter physics as Density Functional Theory, DFT.
The process of solving the Hartree–Fock equations can only be iterative, since these are in fact a Schrödinger equation in which the potential depends on the density, that is, precisely on the wavefunctions to be determined. Practically, the algorithm is started with a set of individual grossly reasonable wavefunctions (in general the eigenfunctions of a harmonic oscillator). These allow to compute the density, and therefrom the Hartree–Fock potential. Once this done, the Schrödinger equation is solved anew, and so on. The calculation stops – convergence is reached – when the difference among wavefunctions, or energy levels, for two successive iterations is less than a fixed value. Then the mean field potential is completely determined, and the Hartree–Fock equations become standard Schrödinger equations. The corresponding Hamiltonian is then called the Hartree–Fock Hamiltonian.
Born first in the 1970s with the works of John Dirk Walecka on quantum hadrodynamics, the relativistic models of the nucleus were sharpened up towards the end of the 1980s by P. Ring and coworkers. The starting point of these approaches is the relativistic quantum field theory. In this context, the nucleon interactions occur via the exchange of virtual particles called mesons. The idea is, in a first step, to build a Lagrangian containing these interaction terms. Second, by an application of the least action principle, one gets a set of equations of motion. The real particles (here the nucleons) obey the Dirac equation, whilst the virtual ones (here the mesons) obey the Klein–Gordon equations.
In view of the non-perturbative nature of strong interaction, and also in view of the fact that the exact potential form of this interaction between groups of nucleons is relatively badly known, the use of such an approach in the case of atomic nuclei requires drastic approximations. The main simplification consists in replacing in the equations all field terms (which are operators in the mathematical sense) by their mean value (which are functions). In this way, one gets a system of coupled integro-differential equations, which can be solved numerically, if not analytically.
The interacting boson model (IBM) is a model in nuclear physics in which nucleons are represented as pairs, each of them acting as a boson particle, with integral spin of 0, 2 or 4. This makes calculations feasible for larger nuclei. There are several branches of this model - in one of them (IBM-1) one can group all types of nucleons in pairs, in others (for instance - IBM-2) one considers protons and neutrons in pairs separately.
One of the focal points of all physics is symmetry. The nucleon–nucleon interaction and all effective interactions used in practice have certain symmetries. They are invariant by translation (changing the frame of reference so that directions are not altered), by rotation (turning the frame of reference around some axis), or parity (changing the sense of axes) in the sense that the interaction does not change under any of these operations. Nevertheless, in the Hartree–Fock approach, solutions which are not invariant under such a symmetry can appear. One speaks then of spontaneous symmetry breaking.
Qualitatively, these spontaneous symmetry breakings can be explained in the following way: in the mean field theory, the nucleus is described as a set of independent particles. Most additional correlations among nucleons which do not enter the mean field are neglected. They can appear however by a breaking of the symmetry of the mean field Hamiltonian, which is only approximate. If the density used to start the iterations of the Hartree–Fock process breaks certain symmetries, the final Hartree–Fock Hamiltonian may break these symmetries, if it is advantageous to keep these broken from the point of view of the total energy.
It may also converge towards a symmetric solution. In any case, if the final solution breaks the symmetry, for example, the rotational symmetry, so that the nucleus appears not to be spherical, but elliptic, all configurations deduced from this deformed nucleus by a rotation are just as good solutions for the Hartree–Fock problem. The ground state of the nucleus is then degenerate.
A similar phenomenon happens with the nuclear pairing, which violates the conservation of the number of baryons (see below).
The most common extension to mean field theory is the nuclear pairing. Nuclei with an even number of nucleons are systematically more bound than those with an odd one. This implies that each nucleon binds with another one to form a pair, consequently the system cannot be described as independent particles subjected to a common mean field. When the nucleus has an even number of protons and neutrons, each one of them finds a partner. To excite such a system, one must at least use such an energy as to break a pair. Conversely, in the case of odd number of protons or neutrons, there exists an unpaired nucleon, which needs less energy to be excited.
This phenomenon is closely analogous to that of Type 1 superconductivity in solid state physics. The first theoretical description of nuclear pairing was proposed at the end of the 1950s by Aage Bohr, Ben Mottelson, and David Pines (which contributed to the reception of the Nobel Prize in Physics in 1975 by Bohr and Mottelson).^{[8]} It was close to the BCS theory of Bardeen, Cooper and Schrieffer, which accounts for metal superconductivity. Theoretically, the pairing phenomenon as described by the BCS theory combines with the mean field theory: nucleons are both subject to the mean field potential and to the pairing interaction.
The Hartree–Fock–Bogolyubov (HFB) method is a more sophisticated approach, ^{[9]} enabling one to consider the pairing and mean field interactions consistently on equal footing. HFB is now the de facto standard in the mean field treatment of nuclear systems.
Peculiarity of mean field methods is the calculation of nuclear property by explicit symmetry breaking. The calculation of the mean field with self-consistent methods (e.g. Hartree-Fock), breaks rotational symmetry, and the calculation of pairing property breaks particle-number.
Several techniques for symmetry restoration by projecting on good quantum numbers have been developed.^{[10]}
Mean field methods (eventually considering symmetry restoration) are a good approximation for the ground state of the system, even postulating a system of independent particles. Higher-order corrections consider the fact that the particles interact together by the means of correlation. These correlations can be introduced taking into account the coupling of independent particle degrees of freedom, low-energy collective excitation of systems with even number of protons and neutrons.
In these way excited states can be reproduced by the means of random phase approximation (RPA), and eventually consistently calculating also corrections to the ground state (e.g. by the means of nuclear field theory ^{[6]}).