This page uses content from Wikipedia and is licensed under CC BY-SA.
|Key sizes||64 bits|
|Block sizes||64 bits|
MULTI2 is a symmetric key algorithm with variable number of rounds. It has a block size of 64 bits, and a key size of 64 bits. A 256-bit implementation-dependent substitution box constant is used during key schedule. Scramble and descramble is done by repeating four basic functions (involutions).
There are a large class of equivalent keys in the Multi2 block cipher. The largest class (so far found) stems from the fact that the Pi3 round function in the key schedule is not bijective. For example, with the following 40-byte input key to the key schedule:
45 ec 86 d8 b6 5e 24 d5 38 fe 1d 90 ce fc a4 22 3e 39 1b e3 da 03 0f cb 9c 9e d7 c6 1c e4 73 61 d0 fa 39 86 58 5d 5b 90
You can perform the following single byte modifications (modification here means XOR against the original key byte):
Can mod byte 5 with CF Can mod byte 7 with 77 Can mod byte 20 with 9A Can mod byte 20 with A9 Can mod byte 20 with D7 Can mod byte 21 with 35 Can mod byte 21 with 6A Can mod byte 21 with 9F Can mod byte 21 with CC Can mod byte 22 with 4D Can mod byte 22 with 7A Can mod byte 22 with A7 Can mod byte 23 with 53 Can mod byte 23 with AE
In this case there are 15 different keys which will schedule to the same 8 32-bit round keys for the ciphers bulk encryption path. The keys are all different in the first keyword used in the Pi3 round function (keys k and k). The collision occurs because a single byte difference turns into a pattern like 0X0X0000 (rotated by 0, 8, 16, or 24 bits) which then expands to a variation of 0X000X00 and finally in the second last line (with the rotate by 16 and the XOR) the differences cancel out. Turning into a zero-delta.
The problem stems from the fact that the function
x = ROL(x, y) ^ x
Where ROL means rotate left by y bits, is not bijective for any value of y. There are similar problems with the Pi2 and Pi4 functions but they are seemingly harder to exploit because the rotation value is smaller.
There are other observations too, for example
x = ROL(x, 1) - x
Found in Pi3, is an identity function for 50% of the values of x (where the most significant byte is zero).
This also means it is possible to have weak keys where instead of forcing single byte differences in the key, they are in the plaintext into Pi3 produces a zero-delta output and possibly leading to a 1R differential.