This page uses content from Wikipedia and is licensed under CC BY-SA.
|Jaguar 420 and Daimler Sovereign|
1968 Jaguar 420 (left) and 1967 Daimler Sovereign (right)
Jaguar 420: 10,236
Daimler Sovereign: 5,824
|Body and chassis|
|Body style||4-door notchback saloon|
|Related||Jaguar Mark 2|
Jaguar Mark X
|Engine||4.2 L XK I6|
|Transmission||4-speed manual (Jag only); 4-speed manual/overdrive; or 3-speed automatic options available|
|Wheelbase||2,727 mm (107 in)|
|Length||4,762 mm (187 in)|
|Width||1,702 mm (67 in)|
|Height||1,429 mm (56 in)|
|Curb weight||1,676 kg (3,695 lb)|
The Jaguar 420 (pronounced "four-twenty") and its Daimler Sovereign equivalent were introduced at the October 1966 London Motor Show and produced for two years as the ultimate expression of a series of "compact sporting saloons" offered by Jaguar throughout that decade, all of which shared the same wheelbase. Developed from the Jaguar S-Type, the 420 cost around £200 more than that model and effectively ended buyer interest in it, although the S-Type continued to be sold alongside the 420/Sovereign until both were supplanted by the Jaguar XJ6 late in 1968.
The 420/Sovereign traces its origins back to the Jaguar Mark 2, which was introduced in 1959 and sold through most of the 1960s. The Mark 2 had a live rear axle and was powered by the XK six-cylinder engine first used in the Jaguar XK120 of 1948. The Mark 2 was available in 2.4, 3.4 and 3.8-litre engine capacities.
In 1961 Jaguar launched two new models with the triple SU carburettor version of the 3.8-litre XK engineer and independent rear suspension: the Mark X (pronounced "mark ten") saloon and the E-Type sports car. Both cars used versions of the Jaguar independent rear suspension system, the Mark X having a 58-inch (1,500 mm) track and the E-Type a 50-inch (1,300 mm) track. In 1965 the Mark X and E-Type were updated with a new 4.2-litre version of the XK engine, still using triple carburettors.
In 1963 Jaguar introduced the Jaguar S-Type as a development of the Mark 2. It used a new intermediate-width, 54-inch (1,400 mm) version of the independent rear suspension in place of the live rear axle of the Mark 2. Other differences from the Mark 2 were extended rear bodywork to provide for a larger boot, a changed roofline for more rear seat passenger headroom, a slightly plusher interior and detail differences around the nose. The S-Type was available with either 3.4 or 3.8-litre XK engines (only 3.8-litre in USA) but in twin-carburettor form because the triple-carburettor setup would not readily fit into what was essentially still the Mark 2 engine bay.
Consequently, Lyons initiated development of a new saloon based on the S-Type, retaining its 54-inch independent rear suspension but adding a twin-carburettor version of the 4.2-litre powerplant and frontal styling more akin to that of the Mark X. The new car was released in August 1966 in the form of two badge-engineered models, the Jaguar 420 and the Daimler Sovereign equivalent.
The starting point for design of the 420/Sovereign was the Jaguar S-Type, which had been in production since 1963 but whose styling had never met with universal acceptance.
In styling terms, the 420/Sovereign was essentially an S-Type with that car's curvaceous nose made much more linear, the better to match its rear styling (which was not altered). Contouring around its four lamps was relatively subtle, with small peaks over each, and its flat frontage sloped forward slightly. The square grille with central divider matched that of the 420G, (which was the new name given to the Mark X at the time of the 420/Sovereign's release). The low-set fog lamps of the Mark 2 and S-Type were replaced by a pair of inner headlamps at the same level as the main headlamps. The inner lamps were lit on main beam only. Dummy horn grilles were added below each inner headlamp to break up what would otherwise have been a large expanse of flat metal on either side of the radiator grille. The tops of the front wheel arches were flattened to match the squarer lines of the nose. The slimline bumpers dispensed with the centre dip which had characterised the bumpers of the Mark 2 and S-Type. All this was done to improve the car's aesthetic balance compared with the S-Type and to create a family resemblance to the Mark X/420G, changes which Sir William could not afford (in either time or money) when the S-Type was designed. No attempt was made to give the 420/Sovereign the same front-hinged bonnet as the Mark X/420G and it retained a rear-hinged bonnet of similar dimensions to those of the S-Type and Mark 2.
Changes to the S-Type's interior to create the 420/Sovereign were driven mainly by safety considerations, with the wood cappings on the doors and dashboard replaced with padded Rexine and a wooden garnish rail on the tops of the door linings. The clock was relocated from the tachometer to the centre of the dashboard top rail, where it was powered by its own battery. The S-Type's pull out map tray below the central instrument panel was not carried over although the 420 retained the same central console and under-dash parcel tray. The seats of the 420 were of slightly different proportions from the S-Type, although they appeared very similar.
The 4.2-litre XK engine of the 420/Sovereign was fitted with the straight port cylinder head and 3/8-inch lift cams. Compression ratios of 7:1, 8:1 and 9:1 could be specified according to local fuel quality, the difference being obtained by varying the crown design of the pistons. The engine was fed by just two carburettors and developed a claimed 245 bhp (183 kW; 248 PS) gross at 5,500 rpm, which was 20 bhp (15 kW; 20 PS) less than the triple-carburettor version in the 420G and E-Type. The maximum torque of the engine at 283 lb⋅ft (384 N⋅m) was virtually the same as that of the triple-carburettor version yet was achieved at 3,750 rpm rather than 4,000 rpm.
The factory-quoted horsepower rating of 245 bhp (183 kW; 248 PS) was measured using the SAE (gross) system current in the USA at the time the 420/Sovereign was sold there. The SAE (gross) system excluded many accessory drives and often used non-standard induction and exhaust systems and so was replaced by the more accurate SAE (net) system in 1972, long after the 420/Sovereign had gone out of production. Reference states that the DIN horsepower rating of the 1977 USA specification 4.2-litre Series II XJ6 was equivalent to 180 bhp. The DIN system yields horsepower ratings which, for most technical purposes, are the same as those that would be obtained using the SAE (net) system. However, the 1977 test would have included power-sapping emissions equipment not present on the 420/Sovereign. Therefore, the SAE (net) power rating of the 420/Sovereign must have lain somewhere between 180 bhp and 245 bhp.
A novel mechanical feature that the 420/Sovereign shared with the 420G was Marles Varamatic power steering, which was offered as an option on the 420 but was standard on the Sovereign. Built by Adwest Engineering Co Ltd of Reading, England, it was a "cam and roller" system in which the non-constant pitch of the cam resulted in a variable steering ratio, with the lowest gearing being at the straight ahead, rising rapidly to either lock. The rise in gearing (equivalent to a drop in ratio from 21.6:1 to 13:1) occurred almost entirely within the first half turn of the steering wheel from the straight-ahead position. The effect was to give very light and relaxed steering at the straight ahead, with quick reaction when cornering. There was no adjustment in the behaviour of the steering in reaction to road speed. A very few of the last S-Types were similarly equipped.
Other mechanical refinements the 420/Sovereign had over the S-Type included:
Contemporary road tests indicate that the performance of the 420 and Sovereign was very highly thought of.
A Motor (UK) road test in May 1967 reported:
It seems somehow insolent to apply medium [price] standards to a saloon that for a combination of speed, comfort and safety is as good as any in the world, regardless of cost.
A North American perspective was provided by Road & Track, whose December 1967 report concluded:
Jaguar's big seller in the U.S. remains the E-type sports cars, but the 420 sedan offers just as unique a combination of qualities in its own field. For a reasonable basic price of $5900, Jaguar offers brisk performance, outstanding braking, excellent handling and ride, quality finish, and luxury in abundance, all in an automobile that's easy to maneuver in today's maddening traffic.
A road test by Wheels (Australia) in August 1967 enthused:
While they can continue to build and sell cars as good as this, there is hope for the man who cares about his motoring.
In terms of performance measured under test conditions, 0–60 mph in under 10 seconds and a top speed of more than 125 mph (201 km/h) were typical. Such performance figures were superior to those of many of the 4.2-litre XJ6 models that followed. Among the few exceptions the testers took was to its 15–16mpg average fuel consumption, which even for the late 1960s was rather high. Combined with the modest size of its two 7 Imperial gallon (31.75 litre) fuel tanks, such fuel consumption gave the model a touring range of only around 250 miles (403 km).
Whereas the Daimler 2½-litre V8 released in 1962 differed from the Jaguar Mark 2 in having a genuine Daimler engine, only the Sovereign's badging and aspects of interior trim differentiated it from the 420.
The market perception of the two marques Daimler and Jaguar, which the material differences between them sought to foster, was that the Daimler represented luxury motoring for the discerning and more mature gentleman whereas the Jaguar was a sporting saloon aimed at a somewhat younger clientele. In the Daimler model range, the Sovereign filled a gap between the 2½-litre V8 and the larger and more conservatively styled 4½-litre Majestic Major. Prices in the UK of the basic 420 and Sovereign, as quoted in the Motor magazine of October 1966 were:
Manual o/d – Jaguar £1615, Daimler £1724
Automatic – Jaguar £1678, Daimler £1787
In return for the ≈6.5% difference in price, the Daimler purchaser obtained only a few substantive advantages but would have considered the cachet of the Daimler badge to be well worth the extra money; indeed the Daimler name attracted buyers who disliked the Jaguar's racier image. By the same token, rather than being unable to afford the difference for a Daimler, those who chose the Jaguar are unlikely to have regarded the Daimler as something they would wish to own anyway.
In total, the Daimler differed from the Jaguar in having:
Difficulty in differentiating the 420/Sovereign from other Jaguar/Daimler models has meant that they are less well known than other Browns Lane products of the era. Even some Jaguar enthusiasts are unsure exactly where and when the 420/Sovereign fitted into the Jaguar range.
At the same time as the 420 was released, Jaguar added a chrome side strip and side repeater indicator to the Mark X and a centre bar to its grille. Along with alterations to the interior, these changes were used to justify renaming it the 420G ("G" for Grand). The Motor magazine of October 1966 referred to the 420G as "still one of the best looking large cars in the world today" and commented on the similarity of its new radiator grille to that of the 420. Given the similarity between both the names and frontal styling of the 420 and 420G, the casual observer might be forgiven for mistaking one for the other.
In 1968 the Daimler DS420 limousine began to be produced, carrying a similarly styled grille to the Sovereign and using the 4.2-litre Jaguar engine in twin carburettor form, and also undergoing final assembly at Jaguar's Browns Lane factory in Coventry, England. Although this car was based on a modified 420G floorpan rather than that of the 420, the existence of a third Jaguar-manufactured model with "420" in its name provides further scope for confusion.
Similar confusion arises with regard to the Daimler Sovereign. From late 1969 its Series I Jaguar XJ6-based successor continued with the Daimler Sovereign name until 1983, when the "Sovereign" model name was instead applied to the high-specification version of the Jaguar (which by then was into its Series III XJ6 iteration).
In 1967, its first full year of production, the 420/Sovereign easily outsold the other Jaguar saloon models still in production (the 240 and 340 Jaguar Mark 2s, Daimler 250 V8, Jaguar S-Type and 420G) and effectively ended buyer interest in the S-Type. Nevertheless, relatively few were made in total due to the fact that the Coventry factory stopped making the Jaguar 420 in 1968, just over two years after production began and with just 10,236 produced. The Daimler Sovereign continued into 1969 and 5,824 were sold.
In 1968, 420/Sovereign sales were again well in excess of those of the S-Type and 420G but it was outsold by the resurgent Jaguar Mark 2/Daimler 250. By this time, many potential 420/Sovereign buyers were hanging back to wait for the new Jaguar XJ6. Introduced late in 1968, the XJ6 was slightly larger than the 420 and swept it from the Jaguar range along with the Mark 2 and S-Type, although the Daimler 250 remained in production into 1969 and the 420G lasted until 1970.
The decision by Sir William to base the Jaguar XJ6 on the engine, suspension and approximate dimensions of the 420/Sovereign showed his faith in the 420/Sovereign formula as the best way to rationalise the company's saloon car range. In that way, the 420/Sovereign became a victim of its own success.
The Jaguar 420 ceased production at Browns Lane in September 1968 and the Daimler Sovereign in July 1969, although CKD ("completely knocked down") Jaguar 420 kits were supplied as late as November 1968 for assembly by Jaguar Cars South Africa Ltd.
As yet, no diecast model of either the 420 or Sovereign has been produced.
|Engine||Jaguar 6-cylinder in line, iron block, alloy head|
|Capacity||4,235 cc (258.4 cu in)|
|Bore/Stroke||92.07 mm × 106 mm (3.6 in × 4.2 in)|
|Valves||DOHC, 2 valves per cylinder|
|Compression Ratio||8:1 (7:1 and 9:1 optional)|
|Max. Power||245 bhp (183 kW; 248 PS) (SAE Gross) @ 5,500 rpm|
|Max. Torque||283 lb⋅ft (384 N⋅m) @ 3,750 rpm|
|Carburettors||Twin SU HD8 (2 in)|
|Suspension||Front independent, with wishbones, coil springs with telescopic dampers and anti-roll bar
Rear independent, with lower wishbone and driveshaft as upper link, radius arms and twin coil springs with telescopic dampers
|Steering||Recirculating ball, worm and nut; Varamatic power assistance optional on Jaguar (standard on Daimler)|
|Brakes||Servo assisted discs on all four wheels, inboard at rear|
|Body/Chassis||Monocoque bodyshell with bolted front subframe, five-seater saloon, front engine, rear-wheel drive|
|Tyres/Wheels||6.40 × 15 crossply or 185 × 15 radial, 5.5 in rim, five-stud disc wheels with wire spoke optional|
|Track||Front=1,410 mm (56 in) Rear=1,384 mm (54 in)|
|Weight (dry)||1695 kg|
|Wikimedia Commons has media related to Jaguar 420.|
|Wikimedia Commons has media related to Daimler Sovereign.|
|Sports||SS 90||SS 100||Production interrupted by World War II||XK120||XK140||XK150||E-Type S1||E-Type S2||E-Type S3||XJ-S|
|Saloon||SS 1 / SS 2||Mark 1||Mark 2, 240, 340|
|SS 1½ litre||Jaguar 1½ litre||S-Type||XJ-C|
|SS 2½ litre||Jaguar 2½ litre||420||XJ6 S1||XJ6 S2|
|SS 3½ litre||Jaguar 3½ litre||Mk V||Mk VII||Mk VIII||Mk IX||Mk X||420G||XJ12 S1||XJ12 S2|
|Racing||C-Type||D-Type||E-Type||XJ13||XJ-C||XJ41 / XJ42|
|Ownership||Independent (SS Cars Ltd)||Independent (renamed Jaguar Cars)||BMH||British Leyland|
|Sports car||Conquest Roadster||Conquest 3–seat dhc||SP250|
|Sports saloon||Special Sports||Conquest Century|
|Large saloon||DE 27||Regency||Regency Mk II||One-O-Four||Majestic||Sovereign 420||Sovereign XJ6 Mk I||Sovereign XJ6 Mk II|
|Regency 4½ Litre (DF 304)||Majestic Major||Double Six Mk I||Double Six Mk II|
|Ownership||Birmingham Small Arms||Jaguar Cars||BMH||British Leyland|