This page uses content from Wikipedia and is licensed under CC BY-SA.
Frequency dispersion in groups of gravity waves on the surface of deep water. The red square moves with the phase velocity, and the green circles propagate with the group velocity. In this deep-water case, the phase velocity is twice the group velocity. The red square overtakes two green circles when moving from the left to the right of the figure. New waves seem to emerge at the back of a wave group, grow in amplitude until they are at the center of the group, and vanish at the wave group front. For surface gravity waves, the water particle velocities are much smaller than the phase velocity, in most cases.
Propagation of a wave packet demonstrating a phase velocity greater than the group velocity without dispersion.
This shows a wave with the group velocity and phase velocity going in different directions. The group velocity is positive (i.e., the envelope of the wave moves rightward), while the phase velocity is negative (i.e., the peaks and troughs move leftward).
The group velocity of a wave is the velocity with which the overall shape of the wave's amplitudes—known as the modulation or envelope of the wave—propagates through space.
For example, if a stone is thrown into the middle of a very still pond, a circular pattern of waves with a quiescent center appears in the water, also known as a capillary wave. The expanding ring of waves is the wave group, within which one can discern individual wavelets of differing wavelengths traveling at different speeds. The shorter waves travel faster than the group as a whole, but their amplitudes diminish as they approach the leading edge of the group. The longer waves travel more slowly, and their amplitudes diminish as they emerge from the trailing boundary of the group.
If ω is directly proportional to k, then the group velocity is exactly equal to the phase velocity. A wave of any shape will travel undistorted at this velocity.
If ω is a linear function of k, but not directly proportional (ω = ak + b), then the group velocity and phase velocity are different. The envelope of a wave packet (see figure on right) will travel at the group velocity, while the individual peaks and troughs within the envelope will move at the phase velocity.
If ω is not a linear function of k, the envelope of a wave packet will become distorted as it travels. Since a wave packet contains a range of different frequencies (and hence different values of k), the group velocity ∂ω/∂k will be different for different values of k. Therefore, the envelope does not move at a single velocity, but its wavenumber components (k) move at different velocities, distorting the envelope. If the wavepacket has a narrow range of frequencies, and ω(k) is approximately linear over that narrow range, the pulse distortion will be small, in relation to the small nonlinearity. See further discussion below. For example, for deep watergravity waves, , and hence vg = vp/2. This underlies the Kelvin wake pattern for the bow wave of all ships and swimming objects. Regardless of how fast they are moving, as long as their velocity is constant, on each side the wake forms an angle of 19.47° = arcsin(1/3) with the line of travel.
(see next section for discussion of this step). Then, after some algebra,
There are two factors in this expression. The first factor, , describes a perfect monochromatic wave with wavevector k0, with peaks and troughs moving at the phase velocity within the envelope of the wavepacket.
The other factor,
gives the envelope of the wavepacket. This envelope function depends on position and time only through the combination .
Therefore, the envelope of the wavepacket travels at velocity
which explains the group velocity formula.
Higher-order terms in dispersion
Distortion of wave groups by higher-order dispersion effects, for surface gravity waves on deep water (with vg = ½vp). This shows the superposition of three wave components—with respectively 22, 25 and 29 wavelengths fitting in a periodic horizontal domain of 2 km length. The wave amplitudes of the components are respectively 1, 2 and 1 meter.
If the wavepacket has a relatively large frequency spread, or if the dispersion ω(k) has sharp variations (such as due to a resonance), or if the packet travels over very long distances, this assumption is not valid, and higher-order terms in the Taylor expansion become important.
As a result, the envelope of the wave packet not only moves, but also distorts, in a manner that can be described by the material's group velocity dispersion. Loosely speaking, different frequency-components of the wavepacket travel at different speeds, with the faster components moving towards the front of the wavepacket and the slower moving towards the back. Eventually, the wave packet gets stretched out. This is an important effect in the propagation of signals through optical fibers and in the design of high-power, short-pulse lasers.
The idea of a group velocity distinct from a wave's phase velocity was first proposed by W.R. Hamilton in 1839, and the first full treatment was by Rayleigh in his "Theory of Sound" in 1877.
For light, the refractive index n, vacuum wavelength λ0, and wavelength in the medium λ, are related by
If the waves are propagating through an anisotropic (i.e., not rotationally symmetric) medium, for example a crystal, then the phase velocity vector and group velocity vector may point in different directions.
In lossy or gainful media
The group velocity is often thought of as the velocity at which energy or information is conveyed along a wave. In most cases this is accurate, and the group velocity can be thought of as the signal velocity of the waveform. However, if the wave is travelling through an absorptive or gainful medium, this does not always hold. In these cases the group velocity may not be a well-defined quantity, or may not be a meaningful quantity.
In his text “Wave Propagation in Periodic Structures”,Brillouin argued that in a dissipative medium the group velocity ceases to have a clear physical meaning. An example concerning the transmission of electromagnetic waves through an atomic gas is given by Loudon. Another example is mechanical waves in the solar photosphere: The waves are damped (by radiative heat flow from the peaks to the troughs), and related to that, the energy velocity is often substantially lower than the waves' group velocity.
Despite this ambiguity, a common way to extend the concept of group velocity to complex media is to consider spatially damped plane wave solutions inside the medium, which are characterized by a complex-valued wavevector. Then, the imaginary part of the wavevector is arbitrarily discarded and the usual formula for group velocity is applied to the real part of wavevector, i.e.,
It can be shown that this generalization of group velocity continues to be related to the apparent speed of the peak of a wavepacket. The above definition is not universal, however: alternatively one may consider the time damping of standing waves (real k, complex ω), or, allow group velocity to be a complex-valued quantity. Different considerations yield distinct velocities, yet all definitions agree for the case of a lossless, gainless medium.
The above generalization of group velocity for complex media can behave strangely, and the example of anomalous dispersion serves as a good illustration.
At the edges of a region of anomalous dispersion, becomes infinite (surpassing even the speed of light in vacuum), and may easily become negative
(its sign opposes Rek) inside the band of anomalous dispersion.
Superluminal group velocities
Since the 1980s, various experiments have verified that it is possible for the group velocity (as defined above) of laser light pulses sent through lossy materials, or gainful materials, to significantly exceed the speed of light in vacuumc. The peaks of wavepackets were also seen to move faster than c.
In all these cases, however, there is no possibility that signals could be carried faster than the speed of light in vacuum, since the high value of vg does not help to speed up the true motion of the sharp wavefront that would occur at the start of any real signal. Essentially the seemingly superluminal transmission is an artifact of the narrow band approximation used above to define group velocity and happens because of resonance phenomena in the intervening medium. In a wide band analysis it is seen that the apparently paradoxical speed of propagation of the signal envelope is actually the result of local interference of a wider band of frequencies over many cycles, all of which propagate perfectly causally and at phase velocity. The result is akin to the fact that shadows can travel faster than light, even if the light causing them always propagates at light speed; since the phenomenon being measured is only loosely connected with causality, it does not necessarily respect the rules of causal propagation, even if it under normal circumstances does so and leads to a common intuition.
^ abBigelow, Matthew S.; Lepeshkin, Nick N.; Shin, Heedeuk; Boyd, Robert W. (2006), "Propagation of a smooth and discontinuous pulses through materials with very large or very small group velocities", Journal of Physics: Condensed Matter, 18 (11): 3117–3126, Bibcode:2006JPCM...18.3117B, doi:10.1088/0953-8984/18/11/017
^Withayachumnankul, W.; Fischer, B. M.; Ferguson, B.; Davis, B. R.; Abbott, D. (2010), "A Systemized View of Superluminal Wave Propagation", Proceedings of the IEEE, 98 (10): 1775–1786, doi:10.1109/JPROC.2010.2052910