This page uses content from Wikipedia and is licensed under CC BY-SA.
|Preferred IUPAC name
|Systematic IUPAC name
Edamine 1,2-Diaminoethane, 'en' when a ligand
3D model (JSmol)
CompTox Dashboard (EPA)
|Molar mass||60.100 g·mol−1|
|Melting point||8 °C (46 °F; 281 K)|
|Boiling point||116 °C (241 °F; 389 K)|
|Vapor pressure||1.3 kPa (at 20 °C)|
|5.8 mol Pa−1 kg−1|
Refractive index (nD)
Heat capacity (C)
|172.59 J K−1 mol−1|
|202.42 J K−1 mol−1|
Std enthalpy of
|−63.55–−62.47 kJ mol−1|
Std enthalpy of
|−1.8678–−1.8668 MJ mol−1|
|GHS signal word||DANGER|
|H226, H302, H312, H314, H317, H334|
|P261, P280, P305+351+338, P310|
|Flash point||34 °C (93 °F; 307 K)|
|385 °C (725 °F; 658 K)|
|Lethal dose or concentration (LD, LC):|
LD50 (median dose)
|500 mg/kg (oral, rat)|
470 mg/kg (oral, guinea pig)
1160 mg/kg (oral, rat)
|US health exposure limits (NIOSH):|
|TWA 10 ppm (25 mg/m3)|
|TWA 10 ppm (25 mg/m3)|
IDLH (Immediate danger)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|what is ?)(|
Ethylenediamine (abbreviated as en when a ligand) is the organic compound with the formula C2H4(NH2)2. This colorless liquid with an ammonia-like odor is a strongly basic amine. It is a widely used building block in chemical synthesis, with approximately 500,000 tonnes produced in 1998. Ethylenediamine readily reacts with moisture in humid air to produce a corrosive, toxic and irritating mist, to which even short exposures can cause serious damage to health (see safety). Ethylenediamine is the first member of the so-called polyethylene amines.
In this reaction hydrogen chloride is generated, which forms a salt with the amine. The amine is liberated by addition of sodium hydroxide and can then be recovered by rectification . Diethylenetriamine (DETA) and triethylenetetramine (TETA) are formed as by-products.
This process involves passing the gaseous reactants over a bed of nickel heterogeneous catalysts.
Ethylenediamine is used in large quantities for production of many industrial chemicals. It forms derivatives with carboxylic acids (including fatty acids), nitriles, alcohols (at elevated temperatures), alkylating agents, carbon disulfide, and aldehydes and ketones. Because of its bifunctional nature, having two amines, it readily forms heterocycles such as imidazolidines.
A most prominent derivative of ethylenediamine is the chelating agent EDTA, which is derived from ethylenediamine via a Strecker synthesis involving cyanide and formaldehyde. Hydroxyethylethylenediamine is another commercially significant chelating agent. Numerous bio-active compounds and drugs contain the N-CH2-CH2-N linkage, including some antihistamines. Salts of ethylenebisdithiocarbamate are commercially significant fungicides under the brand names Maneb, Mancozeb, Zineb, and Metiram. Some imidazoline-containing fungicides are derived from ethylenediamine.
Ethylenediamine is an ingredient in the common bronchodilator drug aminophylline, where it serves to solubilize the active ingredient theophylline. Ethylenediamine has also been used in dermatologic preparations, but has been removed from some because of causing contact dermatitis. When used as a pharmaceutical excipient, after oral administration its bioavailability is about 0.34, due to a substantial first-pass effect. Less than 20% is eliminated by urinal excretion.
Ethylenediamine-derived antihistamines are the oldest of the five classes of first-generation antihistamines, beginning with piperoxan aka benodain, discovered in 1933 at the Pasteur Institute in France, and also including mepyramine, tripelennamine, and antazoline. The other classes are derivatives of ethanolamine, alkylamine, piperazine, and others (primarily tricyclic and tetracyclic compounds related to phenothiazines, tricyclic antidepressants, as well as the cyproheptadine-phenindamine family)
Ethylenediamine, because it contains two amine groups, is a widely used precursor to various polymers. Condensates derived from formaldehyde are plasticizers. It is widely used in the production of polyurethane fibers. The PAMAM class of dendrimers are derived from ethylenediamine.
The bleaching activator tetraacetylethylenediamine is generated from ethylenediamine. The derivative N,N-ethylenebis(stearamide) (EBS) is a commercially significant mold-release agent and a surfactant in gasoline and motor oil.
Ethylenediamine is a well-known bidentate chelating ligand for coordination compounds, with the two nitrogen atoms donating their lone pairs of electrons when ethylenediamine acts as a ligand. It is often abbreviated "en" in inorganic chemistry. The complex [Co(ethylenediamine)3]3+ is an archetypical chiral tris-chelate complex. The salen ligands, some of which are used in catalysis, are derived from the condensation of salicylaldehydes and ethylenediamine.
Related derivatives of ethylenediamine include tetramethylethylenediamine (TMEDA) and tetraethylethylenediamine (TEEDA). Chiral analogs of ethylenediamine include 1,2-diaminopropane and trans-diaminocyclohexane.
Ethylenediamine, like ammonia and other low-molecular weight amines, is a skin and respiratory irritant. Unless tightly contained, liquid ethylenediamine will release toxic and irritating vapors into its surroundings, especially on heating. The vapors react with moisture in humid air to form a characteristic white mist, which is extremely irritating to skin, eyes, lungs and mucus membranes.
Media related to Ethylenediamine at Wikimedia Commons