3D model (JSmol)
CompTox Dashboard (EPA)
|Molar mass||97.561 g/mol|
|Appearance||Blue or blue-green solid|
|Density||3.368 g/cm3, solid|
|Melting point||80 °C (176 °F; 353 K) (decomposes into CuO)|
Solubility product (Ksp)
|2.20 x 10−20|
|Solubility||insoluble in ethanol; |
soluble in NH4OH, KCN
Std enthalpy of
|Main hazards||Skin, Eye, & Respiratory Irritant|
|Safety data sheet||[www.sciencelab.com]|
|Lethal dose or concentration (LD, LC):|
LD50 (median dose)
|1000 mg/kg (oral, rat)|
|US health exposure limits (NIOSH):|
|TWA 1 mg/m3 (as Cu)|
|TWA 1 mg/m3 (as Cu)|
IDLH (Immediate danger)
|TWA 100 mg/m3 (as Cu)|
|Copper(I) oxide |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|what is ?)(|
Copper(II) hydroxide is the hydroxide of copper with the chemical formula of Cu(OH)2. It is a pale greenish blue or bluish green solid. Some forms of copper(II) hydroxide are sold as "stabilized" copper hydroxide, although they likely consist of a mixture of copper(II) carbonate and hydroxide. Copper hydroxide is a weak base.
Copper(II) hydroxide has been known since copper smelting began around 5000 BC although the alchemists were probably the first to manufacture it by mixing solutions of lye (sodium or potassium hydroxide) and blue vitriol (copper(II) sulfate). Sources of both compounds were available in antiquity.
Copper(II) hydroxide can be produced by adding a sodium hydroxide to a dilute solution of copper(II) sulfate (CuSO4·5H2O). The precipitate produced in this manner, however, often contains water and an appreciable amount of sodium hydroxide impurity. A purer product can be attained if ammonium chloride is added to the solution beforehand. Alternatively, copper hydroxide is readily made by electrolysis of water (containing a little electrolyte such as sodium sulfate, or magnesium sulfate) with a copper anode.
The mineral of the formula Cu(OH)2 is called spertiniite. Copper(II) hydroxide is rarely found as an uncombined mineral because it slowly reacts with carbon dioxide from the atmosphere to form a basic copper(II) carbonate. Thus copper slowly acquires a dull green coating in moist air by the reaction:
The structure of Cu(OH)2 has been determined by X-ray crystallography The copper center is square pyramidal. Four Cu-O distances in the plane range are 1.96 Å, and the axial Cu-O distance is 2.36 Å. The hydroxide ligands in the plane are either doubly bridging or triply bridging.
It is stable to about 100 °C.
Copper(II) hydroxide reacts with a solution of ammonia to form a deep blue solution of tetramminecopper [Cu(NH3)4]2+ complex ion. It catalyzes the oxidation of ammonia solutions in presence of dioxygen, giving rise to copper ammine nitrites, such as Cu(NO2)2( NH3)n.
Copper(II) hydroxide has a rather specialized role in organic synthesis. Often, when it is utilized for this purpose, it is prepared in situ by mixing a soluble copper(II) salt and potassium hydroxide.
It is sometimes used in the synthesis of aryl amines. For example, copper(II) hydroxide catalyzes the reaction of ethylenediamine with 1-bromoanthraquinone or 1-amino-4-bromoanthraquinone to form 1-((2-aminoethyl)amino)anthraquinone or 1-amino-4-((2-aminoethyl)amino)anthraquinone, respectively:
Copper(II) hydroxide also converts acid hydrazides to carboxylic acids at room temperature. This conversion is useful in the synthesis of carboxylic acids in the presence of other fragile functional groups. The yields are generally excellent as is the case with the production of benzoic acid and octanoic acid:
Copper(II) hydroxide in ammonia solution, known as Schweizer's reagent, possesses the interesting ability to dissolve cellulose. This property led to it being used in the production of rayon, a cellulose fiber.
It is also used widely in the aquarium industry for its ability to destroy external parasites in fish, including flukes, marine ich, brook and marine velvet, without killing the fish. Although other water-soluble copper compounds can be effective in this role, they generally result in high fish mortality.
Copper(II) hydroxide has been used as an alternative to the Bordeaux mixture, a fungicide and nematicide. Such products include Kocide 3000, produced by Kocide L.L.C. Copper(II) hydroxide is also occasionally used as ceramic colorant.
Copper(II) hydroxide has been combined with latex paint, making a product designed to control root growth in potted plants. Secondary and lateral roots thrive and expand, resulting in a dense and healthy root system. It was sold under the name Spin Out, which was first introduced by Griffin L.L.C. The rights are now owned by SePRO Corp. It is now sold as Microkote either in a solution you apply yourself, or as treated pots.
Together with other components, copper(II) hydroxides are numerous. Several copper(II)-containing minerals contain hydroxide. Notable examples include azurite, malachite, antlerite, and brochantite. Azurite (2CuCO3·Cu(OH)2) and malachite (CuCO3·Cu(OH)2) are hydroxy-carbonates, whereas antlerite (CuSO4·2Cu(OH)2) and brochantite (CuSO4·3Cu(OH)2) are hydroxy-sulfates.
Many synthetic copper(II) hydroxide derivatives have been investigated.
|Wikimedia Commons has media related to Copper(II) hydroxide.|