Our editors will review what you’ve submitted and determine whether to revise the article.Join Britannica's Publishing Partner Program and our community of experts to gain a global audience for your work! SHARE Facebook Twitter
- The history of construction
- Roman achievements
- The first industrial age
- The second industrial age
- Development of building service and support systems
- Modern building practices
- Low-rise residential buildings
- Low-rise commercial, institutional, and industrial buildings
- High-rise buildings
Long-span buildings create unobstructed, column-free spaces greater than 30 metres (100 feet) for a variety of functions. These include activities where visibility is important for large audiences (auditoriums and covered stadiums), where flexibility is important (exhibition halls and certain types of manufacturing facility), and where large movable objects are housed (aircraft hangars). In the late 20th century, durable upper limits of span have been established for these types: the largest covered stadium has a span of 204 metres (670 feet), the largest exhibition hall has a span of 216 metres (710 feet), and the largest commercial fixed-wing aircraft has a wingspread of 66.7 metres (222 feet) and a length of 69.4 metres (228 feet), requiring a 75–80-metre- (250–266-foot-) span hangar. In these buildings the structural system needed to achieve these spans is a major concern.
Structural systems for long-span buildings can be classified into two groups: those subject to bending, which have both tensile and compressive forces, and funicular structures, which experience either pure tension or pure compression. Since bridges are a common type of long-span structure, there has been an interplay of development between bridges and long-span buildings. Bending structures include the girder, the two-way grid, the truss, the two-way truss, and the space truss. They have varying optimum depth-to-span ratios ranging from 1 : 5 to 1 : 15 for the one-way truss to 1 : 35 to 1 : 40 for the space truss. The funicular structures include the parabolic arch, tunnel vault, and dome, which act in pure compression and which have a rise-to-span ratio of 1 : 10 to 1 : 2, and the cable-stayed roof, the bicycle wheel, and warped tension surfaces, which act in pure tension. Within these general forms of long-span structure, the materials used and labour required for assembly are an important constraint along with other economic factors.
Glue-laminated timber can be used as a long-span material. It can be prefabricated using metal connectors into trusses that span up to 45 metres (150 feet). Its most economical forms, however, are the pure compression shapes of the multiple-arch vault, with spans up to 93 metres (305 feet), and ribbed domes, with spans up to 107 metres (350 feet). These are often used as industrial storage buildings for materials such as alumina, salt, and potash that would corrode steel or concrete. Such timber structures are usually found only near forested areas; transportation of timber to other areas increases its cost.
Steel is the major material for long-span structures. Bending structures originally developed for bridges, such as plate girders and trusses, are used in long-span buildings. Plate girders are welded from steel plates to make I beams that are deeper than the standard rolled shapes and that can span up to 60 metres (200 feet); however, they are not very efficient in their use of material. Trusses are hollowed-out beams in which the stresses are channeled into slender linear members made of rolled shapes that are joined by welding or bolting into stable triangular configurations. The members of trusses act either in pure compression or pure tension: in the top and bottom horizontal members the forces are greatest at the centre of the span, and in the verticals and diagonals they are greatest at the supports. Trusses are highly efficient in bending and have been made up to 190 metres (623 feet) in span. Two-way grids can be made of either plate girders or trusses to span square spaces up to 91 metres (300 feet) in size; these two-way structures are more efficient but more expensive to build.
The highly efficient funicular forms are used for the longest spans. Vaults made of rows of parabolic arches, usually in truss form for greater rigidity, have been used for spans of up to 98.5 metres (323 feet). Steel truss domes, particularly the Schwedler triangulated dome, have been the choice for several large covered stadiums, with the greatest span being 204.2 metres (669 feet). Cable-stayed roof construction is another structural system derived from bridge building. A flat roof structure in bending is supported from above by steel cables radiating downward from masts that rise above roof level; spans of up to 72 metres (236 feet) have been built. Another funicular form is the bicycle-wheel roof, where two layers of radiating tension cables separated by small compression struts connect a small inner tension ring to the outer compression ring, which is in turn supported by columns.
Tension-cable networks use a mesh of cables stretched from masts or continuous ribs to form a taut surface of negative curvature, such as a saddle or trumpet shape; the network of cables can be replaced by synthetic fabrics to form the tension surface. Another fabric structure using tension cables is the air-supported membrane. A network of cables is attached by continuous seams to the fabric, and the assembly of cables and fabric is supported by a compression ring at the edge. The air pressure within the building is increased slightly to resist exterior wind pressure. The increase can be as slight as 1.5 percent of atmospheric pressure, and it is possible to maintain this even in large buildings with relatively small compressors. The cables stiffen the fabric against flutter under uneven wind pressure and support it in case of accidental deflation.