Our editors will review what you’ve submitted and determine whether to revise the article.Join Britannica's Publishing Partner Program and our community of experts to gain a global audience for your work! SHARE Facebook Twitter
- The history of construction
- Roman achievements
- The first industrial age
- The second industrial age
- Development of building service and support systems
- Modern building practices
- Low-rise residential buildings
- Low-rise commercial, institutional, and industrial buildings
- High-rise buildings
High-rise construction since 1945
Use of steel and other metals
The second great age of high-rise buildings began after the end of World War II, when the world economy and population again expanded. It was an optimistic time with declining energy costs, and architects embraced the concept of the tall building as a glass prism. This idea had been put forward by the architects Le Corbusier and Ludwig Mies van der Rohe in their visionary projects of the 1920s. These designs employed the glass curtain wall, a non-load-bearing “skin” attached to the exterior structural components of the building. The earliest all-glass curtain wall, which was only on a single street facade, was that of the Hallidie Building (1918) in San Francisco. The first multistory structure with a full glass curtain wall was the A.O. Smith Research Building (1928) in Milwaukee by Holabird and Root; in it the glass was held by aluminum frames, an early use of this metal in buildings. But these were rare examples, and it was not until the development of air conditioning, fluorescent lighting, and synthetic rubber sealants after 1945 that the glass prism could be realized.
The paradigm of the glass tower was defined by the United Nations Secretariat Building (1949) in New York City; Wallace Harrison was the executive architect, but Le Corbusier also played a major role in the design. The UN building, which featured a Weathermaster air-conditioning system and green-tinted glass walls, helped set the standard for tall buildings around the world. Several other influential buildings—such as Mies van der Rohe’s 26-story 860–880 Lake Shore Drive Apartments (1951) in Chicago and Skidmore, Owings & Merrill’s 21-story Lever House (1952) in New York City—helped to further establish the technology of curtain walls. Perhaps the most important element was the development of extruded-aluminum mullion and muntin shapes to support the glass. Aluminum began to be produced in quantity in the United States by the Hall process in 1886; this process for separating the metal from the ore required large amounts of electricity, and declining energy costs after World War II influenced the development of this building technology. Aluminum forms a coating of transparent oxide that protects it against corrosion; this oxide layer can be artificially thickened and coloured through a process called anodizing. Anodized aluminum was first used in the windows of the Cambridge University Library in England in 1934. Aluminum became the principal material of curtain-wall framing because of its corrosion resistance and ease of forming by means of the extrusion process, in which the metal is forced through a series of dies to create complex cross-sectional shapes. Formed sheet aluminum is also used for opaque curtain-wall panels. Other metals used in curtain walls are stainless steel (a compound of 82 percent iron and 18 percent chromium) and so-called weathering steel, copper-bearing steel alloys that form an adherent oxide layer. The bronze curtain wall of Mies van der Rohe’s Seagram Building (1954–58) in New York City proved to be an isolated example. Probably of equal importance in curtain-wall construction was the development of cold-setting rubbers during World War II; these form the elastic sealants that successfully seal the joints between glass and metal and between metal and metal against wind and rain. In the late 1970s the development of artificial diamonds made possible cutting tools that slice stone wafer-thin, and it became an important component of curtain walls.
Following the development of the curtain wall, new forms of structure appeared in high-rise buildings. As environmental control systems increased in cost, economic pressures worked to produce more efficient structures. In 1961 the 60-story Chase Manhattan Bank Building, designed by Skidmore, Owings & Merrill, had a standard steel frame with rigid portal wind bracing, which required 275 kilograms of steel per square metre (55 pounds of steel per square foot), nearly the same as the Empire State Building of 30 years earlier. Economy of structure in tall buildings was demonstrated by the same firm only nine years later in the John Hancock Building in Chicago. It used a system of exterior diagonal bracing to form a rigid tube devised by the engineer Fazlur Khan; although the Hancock building is 100 stories, or 343 metres (1,127 feet), high, its structure is so efficient that it required only 145 kilograms of steel per square metre (29 pounds per square foot). The framed tube, which Khan developed for concrete structures, was applied to other tall steel buildings. Khan used a steel system of nine bundled tubes of different heights—each 22.5 metres (75 feet) square with columns spaced at 4.5 metres (15 feet)—to form the structure of the 110-story, 442-metre (1,450-foot) Sears (now Willis) Tower (1973), also in Chicago. (See Researcher’s Note: Height of the Willis Tower.) Considerably taller buildings are possible with current technology, but their erection also depends on general economic considerations and the resulting marketability of floor space.
Use of reinforced concrete
Parallel to the development of tall steel structures, substantial advancements in high-rise structural systems of reinforced concrete have been made since 1945. The first of these was the introduction of the shear wall as a means of stiffening concrete frames against lateral deflection, such as results from wind or earthquake loads; the shear wall acts as a narrow deep cantilever beam to resist lateral forces. In 1958 the architect Milton Schwartz and engineer Henry Miller used shear walls to build the 39-story Executive House in Chicago to a height of 111 metres (371 feet).
Of equal importance was the introduction of the perimeter-framed tube form in concrete by Fazlur Khan in the DeWitt–Chestnut Apartments (1963) in Chicago; the building rises 43 stories (116 metres, or 387 feet). Lateral stability was achieved by closely spaced columns placed around the building perimeter and connected together by deep beams. The next step in concrete high-rise construction was the combination of the perimeter-framed tube with a largely solid-walled interior tube or shear walls to give further lateral stability. This was employed by Eero Saarinen and Kevin Roche in the 35-story CBS Building (1964) in New York City, and the system was further developed by Khan in the 221-metre (725-foot) Shell Oil Building (1967) in Houston.
Another new structural form in concrete was introduced by Khan in the 174-metre (570-foot) 780 Third Avenue Office Building (1983) in New York City. This is a framed tube with diagonal bracing achieved by filling in diagonal rows of window openings to create exterior bracing members; this is a very efficient system and may lead to yet taller buildings of this type.
Three further innovations helped the rapid rise in height of concrete buildings. One was the development of lightweight concrete, using blast-furnace slag in place of stone as aggregate for floor construction; this reduced the density of the concrete by 25 percent, with a corresponding reduction in the loads the building columns needed to carry. The second was the increase in the ultimate strength of concrete used for columns. Third, the use of pumps to move liquid concrete to the upper floors of tall buildings substantially reduced the cost of placement.
Another important technique developed for concrete high-rise construction is slipforming. In this process, a continuous vertical element of planar or tubular form is continuously cast using a short section of formwork that is moved upward with the pouring process. Slipforming has been used to build a number of very tall structures in Canada, including several industrial chimneys 366 metres (1,200 feet) high and the CN Tower in Toronto, which contains an observation deck and a massive television antenna and has a total height of 553 metres (1,815 feet). Concrete has shown itself to be a serious competitor with steel in high-rise structures; it is now used for the great majority of tall residential buildings and for a substantial number of tall office buildings.
Postwar developments in long-span construction
After 1945 the dome and the shell vault continued to be the major forms of long-span structures. One innovation was the geodesic dome, which was devised by the architect and engineer R. Buckminster Fuller in the 1940s; in this form the ribs are placed in a triangular or hexagonal pattern and lie on the geodesic lines, or great circles, of a sphere. A very shallow spherical form with aluminum trussed members was used by Freeman Fox & Partners for the Dome Discovery built in London in 1951. Fuller’s own patented forms were used in 1958 to build two large hemispheric domes 115.3 metres (384 feet) in diameter using steel tube members. These are used as workshops for the Union Tank Car Company in Wood River, Illinois, and Baton Rouge, Louisiana. The largest geodesic dome is the Poliedro de Caracas, in Venezuela, built of aluminum tubes spanning 143 metres (469 feet).
Another form of steel trussed dome is the lamella dome, which is made of intersecting arches hinged together at their midpoints to form an interlocking network in a diamond pattern. It was used for the first two examples of the great covered sports stadiums built in the United States since the 1960s: the Harris County Stadium, or Astrodome, built in Houston, Texas, in 1962–64 with a span of 196 metres (642 feet) and the 207-metre- (678-foot-) diameter Superdome in New Orleans, Louisiana, designed by Sverdrup and Parcel and completed in 1973. The steel truss continued to be used and was extended to three dimensions to form space trusses. The longest span of this type was the Narita Hangar at Tokyo International Airport, which used a tied portal truss to span 190 metres (623 feet) supporting a space-truss roof spanning 90 metres (295 feet).The Astrodome in Houston, Texas, 1965.Courtesy of Astrodome USA
The concrete dome or shell developed rapidly in the 1950s. The St. Louis Lambert Airport Terminal (1954), designed by Hellmuth, Yamasaki and Leinweber, has a large hall 36.6 metres (120 feet) square, spanned by four intersecting thin-shell concrete barrel vaults supported at the four corners; the thickness of the shell varies from 20 centimetres (8 inches) at the supports to 11.3 centimetres (4.5 inches) at the centre. Another example is the King Dome, in Seattle, Washington, which covers a sports stadium with a thin single shell concrete parabolic dome stiffened with ribs 201 metres (661 feet) in diameter.
New forms of the long-span roof appeared in the 1950s based on the steel cables that had long been used in suspension bridges. One example was the U.S. Pavilion at the 1958 Brussels World’s Fair, designed by the architect Edward Durell Stone. It was based on the familiar principle of the bicycle wheel; its roof had a diameter of 100 metres (330 feet), with a steel tension ring at the perimeter from which two layers of radial cables were tightly stretched to a small tension ring in the middle—the double layer of cables gave the roof stability against vertical movement. The Oakland–Alameda County Coliseum (1967), by Skidmore, Owings & Merrill, extended this system to 126 metres (420 feet) in diameter, but only a single layer of cables, stiffened by encasing ribs of concrete, connects the inner and outer rings.
Another system derived from bridge construction is the cable-stayed roof. An early example is the TWA Hangar (1956) at Kansas City, Missouri, which shelters large aircraft under a double cantilever roof made of semicylindrical shells that reach out 48 meters (160 feet); deflection is reduced and the shells kept in compression by cables that run down from central shear walls to beams in the valleys between the shells. Another example of the cable-stayed roof is the McCormick Place West Exhibition Hall (1987) in Chicago, by Skidmore, Owings & Merrill. Two rows of large concrete masts rise above the roof, supporting steel trusses that span 72 metres (240 feet) between the masts and cantilever 36 metres (120 feet) to either side; the trusses are also supported by sets of parallel diagonal cables that run back to the masts.
A third form of long-span roof structures in tension are air-supported plastic membranes, which were devised by Walter Bird of Cornell University in the late 1940s and were soon in use for swimming pools, temporary warehouses, and exhibition buildings. The Ōsaka World’s Fair of 1970 included many air-supported structures, the largest of which was the U.S. Pavilion designed by the engineers Geiger Berger Associates; it had an oval plan 138 × 79 metres (460 × 262 feet), and the inflated domed roof of vinyl-coated fabric was restrained by a diagonally intersecting network of steel cables attached to a concrete compression ring at the perimeter. The Ōsaka pavilion system was later adapted for such large sports stadiums as the Silverdome (1975) in Pontiac, Michigan, and the Hubert H. Humphrey Metrodome (1982) in Minneapolis. Air-supported structures are perhaps the most cost-effective type of structure for very long spans.
Construction has settled into a period of relative calm after the explosive innovations of the 19th century. Steel, concrete, and timber have become fairly mature technologies, but there are other materials—such as fibre composites—that may yet play a major role in building.