success
fail
**Oct**
JAN
**Feb**
02
**2011**
2013
**2014**
163 captures 14 Oct 2007 - 03 Nov 2017
About this capture
COLLECTED BY
Collection: The WebBase Archive
TIMESTAMPS

## NIST, Computer Security Division, Computer Security Resource Center

- CAVP
- Symmetric Key - includes AES, TDES
- Additional Modes of Operation - includes XTS-AES
- Asymmetric Key - includes DSA (both FIPS 186-2 and FIPS 186-3), ECDSA (both FIPS 186-2 and FIPS 186-3), RSA (both FIPS 186-2 and FIPS 186-3)
- SHS
- RNG
- DRBG
- Key Management - Key Agreement Schemes and Key Confirmation (KAS)
- MAC - includes CMAC, CCM, GCM/GMAC, HMAC
- KDF - includes SP800-108
- Component Testing: includes component testing for SP800-135 KDFs, SP800-56A ECCCDH Primitive Testing, FIPS 186-3 ECDSA Signature Generation Primitive Testing, FIPS 186-3 RSA PKCS1.5 and PKCS PSS Signature Generation Primitive Testing
- Announcements
- Notices
- Standards
- Validation Lists
- Contacts
- CAVP Management Manual and FAQs

# CAVP Announcements

- [10-02-12] -- New release of the CAVS algorithm validation testing tool to the CST Laboratories (CAVS14.1). This version of the CAVS tool address several minor updates. For more information, please go to the Announcements page.
- [08-20-12] -- New release of the CAVS algorithm validation testing tool to the CST Laboratories (CAVS14.0). This version of the CAVS tool addresses adds validation testing for FIPS180-4's SHA512/224, SHA512/256, HMAC SHA-512/224 and HMAC SHA-512/256, and component testing for RSA Signature Generation primitive and ECDSA Signature Generation primitive and several other modifications. For more information, please go to the Announcements page.
- [03-23-12] -- Released update of CAVP FAQ

# CAVP Notices

- [09-06-12] -- GMAC implementation error reported by 3rd party in
**Open SSL FIPS Object Module (Cert. #1747) Version 2.0 (AES Cert. #1884) and Version 2.0.1 (AES Cert. #2116)**

# Cryptographic Algorithm Validation Program (CAVP)

The **Cryptographic Algorithm Validation Program (CAVP)** encompasses validation testing for FIPS approved and NIST recommended cryptographic algorithms and components of algorithms. Cryptographic algorithm validation is a prerequisite to the Cryptographic Module Validation Program (CMVP). The CAVP was established by NIST and the Communications Security Establishment Canada (CSEC) in July 1995. All of the tests under the CAVP are handled by third-party laboratories that are accredited as Cryptographic and Security Testing (CST) Laboratories by the National Voluntary Laboratory Accreditation Program (NVLAP). Vendors interested in validation testing of their algorithm implementation may select any of the accredited laboratories.

# Cryptographic Algorithm Validation Testing Specifications

Below are the algorithms for which the CAVP currently has validation testing. Each section consists of links to the cryptographic algorithm standard, the algorithm validation test suite specifications (the Validation System document), the algorithm validation list, and the test vectors to informally verify the correctness of an algorithm implementation.

## Symmetric Key

### Advanced Encryption Standard (AES), Triple-DES, and Skipjack Algorithms

Currently, there exist three FIPS-approved symmetric key algorithms for encryption: Advanced Encryption Standard (**AES**), **Triple-DES**, and **Skipjack**. *AES is the FIPS-Approved symmetric encryption algorithm of choice*.

- FIPS 197,
*Advanced Encryption Standard (AES)*, specifies the AES algorithm. *Recommendation for the Triple Data Encryption Algorithm (TDEA) Block Cipher*, NIST Special Publication 800-67, January 2012.*Recommendation for Block Cipher Modes of Operation, Methods and Techniques*, Special Publication 800-38A, December 2001. Appendix E references Modes of Triple-DES.*Triple Data Encryption Algorithm Modes of Operation*, ANSI X9.52-1998.**Copies of X9.52-1998 may be obtained from X9**, a standards committee for the financial services industry. NIST does**NOT**have copies of the standard available for distribution.- The Skipjack algorithm is referenced in FIPS 185,
*Escrowed Encryption Standard (EES)*, and a complete specification is available in*SKIPJACK and KEA Algorithm Specifications (Version 2.0, 29 May 1998)*.

### Testing Requirements:

Validation testing for AES, Triple-DES, and Skipjack algorithms are handled by the Cryptographic Algorithm Validation Program's (CAVP) CST labs.

- AES tests are described in The Advanced Encryption Standard Algorithm Validation Suite (AESAVS).
- Triple-DES tests are described in NIST Special Publication 800-20,
*Modes of Operation Validation System for the Triple Data Encryption Algorithm (TMOVS): Requirements and Procedures*. An additional test, the Multi-block Message Text (MMT), is also required. **Additional testing note:**The AES and TDES Counter Mode requires additional prerequisite testing of the underlying symmetric algorithm using any mode of operation that utilizes the forward cipher function.- Skipjack tests: As of January 2011, the CAVP only validates Skipjack decryption implementations. Please see SP800-131A Transitions: Recommendation for Transitioning the Use of Cryptographic Algorithms and Key Lengths for more information.

The Skipjack tests for the decrypt state are described in NIST Special Publication 800-17,*Modes of Operation Validation System (MOVS): Requirements and Procedures*. The validation test suite for Skipjack implementations using the decrypt state consists of the Modes test for the Decryption Process, the Variable Ciphertext Known Answer Test and the Variable Key Known Answer Test for the Decryption Process. Based on the Skipjack modes of operation implemented, SP800-17 Section 5 indicates the tests required to validate an implementation of the Skipjack Algorithm.

(NIST Special Publication 800-17 erroneously states the Initial Permutation KAT for the Decryption Process is also required for Skipjack validation. This is not true.)

### Validation List:

NIST maintains validation lists for AES, Triple-DES, and Skipjack. These lists identify the algorithm implementations which have been tested as correctly implementing the AES, Triple-DES, and Skipjack algorithms. Points of contact and implementation descriptions are also included.

### Test Vectors:

The following files provide electronic versions of the vectors for the Known Answer Test (KAT), and sample values for the Monte Carlo(MCT) test, and the Multiblock Message (MMT) test. These values are properly formatted in response (.rsp) files. Vendor response files should match this format exactly.

In addition, a file with intermediate results (.txt) for the Monte Carlo test is supplied. The Monte Carlo tests consist of 400 cases. For each case, initial values are provided, and 10,000 iterations of the desired mode of operation are run. The output of each iteration is used as input to the next iteration. To aid debugging, we provide the output for each of the first five (5) iterations of the 10,000 as well as the final (10,000th) output. The intermediate values are indented by one tab and clearly identified by use of the word "Intermediate".

These vectors can be used to informally verify the correctness of an AES and/or TDES algorithm implementation. The validation system documents (see above) describe the details of the tests.

**NOTE, use of these vectors does not take the place of validation obtained through the Cryptographic Algorithm Validation Program (CAVP).**

- Test Vectors for AES:
- Test Vectors for TDES:

## Additional Modes of Operation for Symmetric Algorithms

### XTS-AES

Currently, there exist multiple modes of operation that are described in the NIST Special Publication 800-38 series. Most of these modes of operation are message authentication codes and therefore have been listed under the MAC section. XTS-AES is more like the original modes of operation and therefore is described below.

- NIST SP 800-38E,
*Recommendation for Block Cipher Modes of Operation: The XTS-AES Mode for Confidentiality on Block-Oriented Storage Devices*, specifies the XTS-AES algorithm.

### Testing Requirements:

Validation testing for XTS-AES mode of operation algorithm is handled by the Cryptographic Algorithm Validation Program's (CAVP) CST labs.

- XTS-AES tests are described in The XTS-AES Validation System (XTSVS).

### Validation List:

NIST maintains the current XTS-AES Validations. XTS-AES validations are included on the AES Validation List.

### Other Information:

- XTS-AES Test Vectors - This file provides an electronic version of the test vectors that can be used to informally verify the correctness of an XTS-AES algorithm implementation, using the validation tests described in The XTS-AES Validation System (XTSVS).
**However, use of these vectors does not take the place of validation obtained through the Cryptographic Algorithm Validation Program (CAVP).**

Back to Top

## Asymmetric Key

### FIPS 186-3 Digital Signature Standard (DSS) (DSA, RSA, and ECDSA algorithms)

On June 10, 2009, NIST announced the adoption of FIPS 186-3, *Digital Signature Standard (DSS)*, which is a revision of FIPS 186-2. The FIPS specifies three techniques for the generation and verification of digital signatures:

**Digital Signature Algorithm (DSA),****RSA (as specified in ANSI X9.31 (RSA)),**and**Elliptic Curve DSA (ECDSA; as specified in ANSI X9.62).**

FIPS 186-3 allows the use of any random number generator (RNG) or random bit generator (RBG) that is approved for use in FIPS 140-validated modules, subject to the transition schedule specified in SP 800-131A. Specific references to SP 800-90 should not be considered as a requirement to use a generator specified in SP 800-90 until such time as the use of the other generators is no longer allowed.

FIPS 186-3 incorporates the following changes:

**General**:

- • Specifies the use of all hash functions specified provided in FIPS 180-3, rather than just SHA-1,
- • Provides requirements for obtaining assurances of domain parameter validity (DSA and ECDSA only), public key validity, and private key possession,
- • References SP 800-57 for guidance on key management, including the key sizes and security strengths to be used,
- • Provides guidance on domain parameter and key pair management,
- • Provides more guidance on the use of RNGs to generate key pairs,
- • Provides revised primality test guidance.

**DSA:** - • Specifies larger key sizes,
- • Replaces the domain parameter generation routine with new methods,
- • Includes explicit methods for the validation of domain parameters,

**RSA:** - • Approves the use of both ANSI X9.31 and PKCS #1, and provides guidance for their use,
- • Provides multiple explicit methods for the generation of key pairs,
- • Limits the key sizes and provides criteria for the generation of key pairs to be used for Federal government use.

ECDSA: - • Although the Recommended Elliptic Curves continue to be included in FIPS 186-3 (as they were in FIPS 186-2), FIPS 186-3 allows the generation of alternative curves, using methods specified in ANS X9.62.

Copies of the **ANSI X9.31** and **ANSI X9.62** standards are available from X9, a standards committee accredited by the American National Standards Institute (ANSI). NIST does NOT have copies of these standards available for distribution.

All three digital signature techniques in FIPS 186-3 make use of the Secure Hash Algorithms specified in FIPS 180-3 dated October 2008, *Secure Hash Standard (SHS)* accessible via the hashing section of this webpage.

FIPS 186-2 and FIPS 186-3 are currently the *only* FIPS standards that contain Approved methods for digital signatures.

### Testing Requirements:

CST labs can test for conformance to the algorithm specifications in FIPS 186-3 for the DSA, ECDSA, and RSA algorithms.

The algorithm validation testing requirements for FIPS 186-3 DSA are specified in:

**Digital Signature Algorithm Validation System (DSA2VS)**

**Additional testing note:** For the Domain Parameter Generation and Verification, and the Signature Generation and Verification functions, the underlying SHA algorithm must be validated as part of the DSA validation. In addition, Signature Generation and Key Pair Generation require the RNG/DRBG algorithm to be validated as well.

The algorithm validation testing requirements for FIPS 186-3 ECDSA are specified in:

**Elliptic Curve Digital Signature Algorithm Validation System (ECDSA2VS)**

**Additional testing note:** As part of the ECDSA validation, additional algorithms implemented by the ECDSA algorithm must be validated. For the Key Pair Generation function, this includes the underlying RNG/ DRBG algorithm. For the Signature Generation function, the underlying SHA and the RNG/DRBG algorithms must be validated. For the Signature Verification function, the underlying SHA algorithm must be validated.

The algorithm validation testing requirements for FIPS 186-3 RSA are specified in:

**186-3 RSA Validation System (186-3RSAVS)**

**Additional testing note:** The underlying SHA algorithm must be validated as part of the 186-3 RSA validation for all functions - Key Generation, Signature Generation, and Signature Verification.. In addition, Key Generation requires the RNG/DRBG algorithm to be validated as well.

### FIPS 186-2 Digital Signature Standard (DSS) (DSA, RSA, and ECDSA algorithms)

On February 15, 2000, NIST announced the approval of *FIPS 186-2 with Change Notice 1 dated October 5, 2001*, *Digital Signature Standard (DSS)*, which supersedes FIPS 186-1. This standard specifies three FIPS-approved algorithms for generating and verifying digital signatures:

**Digital Signature Algorithm (DSA),****RSA (as specified in ANSI X9.31), and****Elliptic Curve DSA (ECDSA; as specified in ANSI X9.62).**

New items in the DSS include:

- the approval of Elliptic Curve DSA (ECDSA) as specified in ANSI X9.62,
- a list of recommended elliptic curves for Federal Government use (see Appendix 6 of
*FIPS 186-2 with Change Notice 1 dated October 5, 2001*), and - an allowance for the continued acquisition of implementations of PKCS#1 for a transition period of eighteen (18) months.

Copies of the **ANSI X9.31** and **ANSI X9.62** standards are available from X9, a standards committee accredited by the American National Standards Institute (ANSI). NIST does NOT have copies of these standards available for distribution.

All three digital signature techniques in FIPS 186-2 (with Change Notice 1 dated October 5, 2001) make use of the Secure Hash Algorithms specified in FIPS 180-3 dated October 2008, *Secure Hash Standard (SHS)* accessible via the hashing section of this webpage.

DSA, RSA, and ECDSA are currently the *only* FIPS-approved methods for digital signatures.

### Testing Requirements:

CST labs can test for conformance to the algorithm specifications in FIPS 186-2 (with Change Notice 1 dated October 5, 2001). Algorithm specifications included in this standard are the DSA, the RSA and the ECDSA algorithms. In addition, NIST can test for conformance to two other versions of the RSA algorithm specified in *PKCS#1 v2.1: RSA Cryptography Standard, RSA Laboratories, June 2002*.

The testing requirements are specified in:

**Digital Signature Algorithm Validation System (DSAVS)**

**Additional testing note:** For the Domain Parameter Generation and Verification, and the Signature Generation and Verification functions, the underlying SHA-1 algorithm must be validated as part of the DSA validation.

**RSA Validation System (RSAVS)**

**Beginning September 28, 2006:** Validation testing for RSA algorithm implementations of the RSASSA-PKCS1-v1_5, as specified in *Public Key Cryptography Standards (PKCS) #1 v2.1: RSA Cryptography Standard-2002*, and the RSA X9.31 algorithms include additional testing to assure the encoded message EM and the intermediate integer IR are in the correct formats. This testing verifies that an implementation under test (IUT) does not contain a potential implementation design that could introduce a vulnerability in these algorithms. This testing has been added to the Signature Verification validation test described in the RSAVS document. No modification to this document was necessary to add this feature. Below in the Test Vectors section, there are test vectors available to informally test if this vulnerability exists in an implementation.

For all validated cryptographic modules that incorporate RSA, the CAVP and CMVP strongly suggest re-testing of the RSA algorithmic implementations to determine if the vulnerability is present.

If new CAVP testing is performed and the vulnerability is determined not to be present, the CSTL can submit the new test results to the CAVP along with a letter indicating that the implementation passed the RSA testing in CAVS5.2 and the vulnerability is not present. The letter should request that a new algorithm certificate be printed to replace the already issued certificate referencing the new version of CAVS. Please indicate the already issued certificate number. This letter should be included in the zip file along with the other files. Note that the certificate number will not change. Only the reference to the version of the CAVS tool and the signatory date will be changed. (Note the validation request will be submitted using already established procedures.)

If CAVP testing is performed and the vulnerability is discovered, the following revalidation process shall be followed:

- The algorithm implementation is changed to remove the vulnerability resulting in a different version number,
- Submit the new test results to the CAVP for the new version of the implementation. A new algorithm certificate will be issued for the new version of the implementation. The certificate will reference CAVS5.2.

**Additional testing note:** For the RSA functions, all underlying SHA algorithm(s) supported by the RSA implementation must be validated as part of the RSA validation.

**Elliptic Curve Digital Signature Algorithm (ECDSA) Validation System (ECDSAVS)**

**Additional testing note:** For the Signature Generation and Verification functions, the underlying SHA-1 algorithm must be validated as part of the ECDSA validation.

### Validation Listings:

NIST maintains the current DSA, ECDSA, and RSA Validation Lists.

### Test Vectors:

The following files provide an electronic version of the test vectors that can be used to informally verify the correctness of the FIPS 186-2 and FIPS 186-3 algorithm implementation using the associated validation system document (DSAVS, ECDSAVS, or RSAVS, DSA2VS, ECDSA2VS, or 186-3RSAVS). These values are properly formatted in response (.rsp) files. Vendor response files should match this format exactly.

If applicable, files with intermediate results (.txt) are supplied for the tests to aid in debugging. Please refer to the readme.txt file located in the zip files below for detailed explanations.

**Use of these vectors does not take the place of validation obtained through the Cryptographic Algorithm Validation Program (CAVP).**

### Other Information:

Elliptic curves recommended for Federal Government use are specified in Appendix 6 of *FIPS 186-2 with Change Notice 1 dated October 5, 2001*. They are also listed separately: PDF and Word.

## Secure Hash Standard (SHS)

### (SHA-1, SHA-224, SHA-256, SHA-384, SHA-512, SHA-512/224 and SHA-512/256 algorithms)

The Secure Hash Algorithms (SHA-1, SHA-224, SHA-256, SHA-384, SHA-512, SHA-512/224 and SHA-512/256) are specified in FIPS 180-4 dated March 2012, *Secure Hash Standard (SHS)*.

### Testing Requirements:

CST labs can test for conformance to the SHA algorithms in FIPS 180-4. The testing requirements for these algorithms can be found in the document titled The Secure Hash Algorithm Validation System (SHAVS).

### Validation List:

NIST maintains the current SHA Validation List.

### Test Vectors:

The following files provide an electronic version of the test vectors that can be used to informally verify the correctness of the SHA algorithm implementation using the SHAVS. These values are properly formatted in response (.rsp) files. Vendor response files should match this format exactly.

If applicable, files with intermediate results (.txt) are supplied for the tests to aid in debugging. Please refer to the readme.txt file located in the zip files below for detailed explanations.

**Use of these vectors does not take the place of validation obtained through the Cryptographic Algorithm Validation Program (CAVP). **

- SHA Test Vectors for Hashing Bit-Oriented Messages
- SHA Test Vectors for Hashing Byte-Oriented Messages

## Random Number Generators (RNG)

The algorithms for generating approved random numbers are referenced in FIPS 140-2 Annex C.

### Testing Requirements:

CST labs can test for conformance to the following RNG algorithms that are referenced in FIPS 140-2 Annex C:

- FIPS 186-2 with Change Notice 1 dated October 5, 2001 (Appendix 3.1 and 3.2)
**ANSI X9.31**(Appendix A.2.4) -*Using 2-Key Single DES*- NIST-Recommended Random Number Generator based on ANSI X9.31 Appendix A.2.4 using the 3-Key Triple DES and AES algorithms
**ANSI X9.62**(Appendix A.4).

Copies of the ANSI X9.31 and ANSI X9.62 standards are available from X9, a standards committee accredited by the American National Standards Institute (ANSI). NIST does NOT have copies of these standards available for distribution.

The testing requirements for these algorithms can be found in the document titled The Random Number Generator Validation System (RNGVS).

### Validation List:

NIST maintains the current RNG Validation List.

### Test Vectors:

RNG Test Vectors - These files provide an electronic version of the test vectors that can be used to informally verify the correctness of an RNG algorithm implementation using the RNGVS. **However, use of these vectors does not take the place of validation obtained through the Cryptographic Algorithm Validation Program (CAVP). **

## Deterministic Random Bit Generators (DRBG)

*SP 800-90A Recommendation for Random Number Generation Using Deterministic Random Bit Generators* specifies mechanisms for the generation of random bits using deterministic methods. There are four mechanisms discussed in this Special Publication. These mechanisms are based on either hash functions (Hash_DRBG, HMAC_DRBG), block cipher algorithms using Counter mode (CTR_DRBG ) or number theoretic (Dual EC_DRBG) problems.

### Testing Requirements:

CST labs can test for conformance to the DRBG algorithms in Special Publication 800-90. The testing requirements for this algorithm can be found in the document titled The DRBG Validation System (DRBGVS). **Additional testing note:** Each of the mechanisms containing underlying algorithms which must be validated as part of the DBRG validation. For HASH_DRBG, the SHA algorithm(s) must be tested. For HMAC_DRBG, the HMAC algorithm must be tested. For the block cipher algorithms using Counter mode CTR_DRBG, a NIST-Approved symmetric key algorithm using Counter mode, must be validated as part of the CMAC validation. Currently, NIST approves both the AES and TDES algorithms for use with DRBG. For Dual EC_DRBG, the ECDSA Key Generation function and the SHA algorithm must be tested. The ECDSA Key Generation function tests the point multiplication function used in the Dual EC_DRBG.

### Validation List:

NIST maintains the current DRBG Validation List.

### Test Vectors:

DRBG Test Vectors - These files provide an electronic version of the test vectors that can be used to informally verify the correctness of a DRBG algorithm implementation using the DRBGVS. **However, use of these vectors does not take the place of validation obtained through the Cryptographic Algorithm Validation Program (CAVP). **

DRBG Test Vectors DRBG Test Vectors In this zip file, there are 4 text files with NIST SP 800-90 DRBG test vectors: **HASH_DRBG.txt, HMAC_DRGB.txt, CTR_DRBG.txt, ** and **Dual_EC_DRBG.txt.**.

## Key Management -Key Agreement Schemes and Key Confirmation (KAS)

*SP 800-56A Recommendation for Pair-Wise Key Establishment Schemes Using Discrete Logarithm Cryptography (Revised March 2007)* specifies key establishment schemes based on standards developed by the Accredited Standards Committee (ASC) X9, Inc.: ANS X9.42 (Agreement of Symmetric Keys Using Discrete Logarithm Cryptography) and ANS X9.63 (Key Agreement and Key Transport Using Elliptic Curve Cryptography).

### Testing Requirements:

CST labs can test for conformance to the Key Agreement Schemes (KAS) and Key Confirmation algorithms specified in Special Publication 800-56A. The testing requirements for this algorithm can be found in the document titled The KAS Validation System (KASVS). **Additional testing note:** The KAS validation process requires additional prerequisite testing of the underlying DSA and/or ECDSA algorithm based on which type of cryptography is supported and which underlying cryptographic functions are supported, the supported SHA algorithm(s), supported MAC algorithm(s) (CCM, CMAC, and/or HMAC), and the supported RNG and/or DRBG algorithm(s). (See CAVP FAQ GEN.5 for more detailed information on prerequisites.)

### Validation List:

NIST maintains the current KAS Validation List.

### Test Vectors:

KAS Test Vectors - These files provide an electronic version of the test vectors that can be used to informally verify the correctness of a key agreement scheme and key confirmation algorithm implementation using the KASVS.

KAS Test Vectors See the KASVS document for an explanation of the files.

Back to Top## Message Authentication (MAC)

### Block Cipher-based MAC Algorithm (CMAC)

The CMAC algorithm is specified in Special Publication 800-38B dated May 2005, Recommendation for Block Cipher Modes of Operation: The CMAC Mode for Authentication. CMAC can be considered a mode of operation of the block cipher because it is based on an approved symmetric key block cipher, such as the Advanced Encryption Standard (AES) algorithm currently specified in Federal Information Processing Standard (FIPS) Pub. 197. CMAC is also an approved mode of the Triple Data Encryption Algorithm (TDEA).

NOTE: Replacement examples have been provided to correct the examples located in the back of SP800-38B. (Updated SP800-38B Examples).

### Testing Requirements:

CST labs can test for conformance to the CMAC algorithm in Special Publication 800-38B. The testing requirements for this algorithm can be found in the document titled The CMAC Validation System (CMACVS). **Additional testing note:** The CMAC validation process requires additional prerequisite testing of the underlying NIST-Approved symmetric key algorithm using any mode of operation used by the CMAC implementation that utilizes the forward cipher function. Currently, NIST approves both the AES and TDES algorithms for use with CMAC.

### Validation List:

NIST maintains the current CMAC Validations. CMAC Validations are included on the validation list of its approved symmetric key block cipher -- therefore it is included on either the AES Validation List or the TDES Validation List.

### Test Vectors:

CMAC Test Vectors - These files provide an electronic version of the test vectors that can be used to informally verify the correctness of a CMAC algorithm implementation using the CMACVS.

### Counter with Cipher Block Chaining-Message Authentication Code (CCM)

The Counter with Cipher Block Chaining-Message Authentication Code (CCM) is specified in Special Publication 800-38C dated May, 2004, Counter with Cipher Block Chaining-Message Authentication Code (CCM). CCM is based on an approved symmetric key block cipher algorithm whose block size is 128 bits, such as the Advanced Encryption Standard (AES) algorithm currently specified in Federal Information Processing Standard (FIPS) Pub. 197 [2]; thus, CCM cannot be used with the Triple Data Encryption Algorithm [3], whose block size is 64 bits. Currently the only NIST-Approved 128 bit symmetric key algorithm is AES.

### Testing Requirements:

CST labs can test for conformance to the CCM algorithm in Special Publication 800-38C. The testing requirements for this algorithm can be found in the document titled The Counter with Cipher Block Chaining-Message Authentication Code (CCM) Validation System (CCMVS). **Additional testing note:** The CCM validation process requires additional prerequisite testing of the underlying NIST-Approved 128 bit symmetric key algorithm using any mode of operation used by the CCM implementation that utilizes the forward cipher function. Currently, the only 128 bit symmetric key algorithm approved by NIST is AES.

### Validation List:

NIST maintains the current CCM Validations. CCM Validations are included on the validation list of its approved symmetric key block cipher whose block size is 128 bits-- therefore it is included on the AES Validation List. NIST maintains the original CCM Validation List. for historical purposes. The information contained on the CCM Validation List has been duplicated in the AES Validation List.

### Test Vectors:

CCM Test Vectors - These files provide an electronic version of the test vectors that can be used to informally verify the correctness of a CCM algorithm implementation using the CCMVS.

### Galois/Counter Mode (GCM) and GMAC

The Galois/Counter Mode (GCM) and GMAC is specified in Special Publication 800-38D dated November, 2007, Recommendation for Block Cipher Modes of Operation: Galois/Counter Mode (GCM) and GMAC. GCM is based on an approved symmetric key block cipher algorithm whose block size is 128 bits, such as the Advanced Encryption Standard (AES) algorithm currently specified in Federal Information Processing Standard (FIPS) Pub. 197 [2]; thus, GCM cannot be used with the Triple Data Encryption Algorithm [3], whose block size is 64 bits. Currently the only NIST-Approved 128 bit symmetric key algorithm is AES.

### Testing Requirements:

CST labs can test for conformance to the GCM and GMAC algorithms in Special Publication 800-38D. The testing requirements for this algorithm can be found in the document titled The Galois/Counter Mode (GCM) and GMAC Validation System (GCMVS). **Additional testing note:** The GCM validation process requires additional prerequisite testing of the underlying NIST-Approved 128 bit symmetric key algorithm using any mode of operation used by the GCM implementation that utilizes the forward cipher function. Currently, the only 128 bit symmetric key algorithm approved by NIST is AES. If the IVs are generated internally, the RNG or DRBG must also be validated.

### Validation List:

NIST maintains the current GCM Validations. GCM Validations are included on the validation list of its approved symmetric key block cipher whose block size is 128 bits-- therefore it is included on the AES Validation List.

### Test Vectors:

GCM Test Vectors - These files provide an electronic version of the test vectors that can be used to informally verify the correctness of a GCM algorithm implementation using the GCMVS.

### Keyed-Hash Message Authentication Code (HMAC)

The Keyed-Hash Message Authentication Code (HMAC) is specified in FIPS 198 dated March 6, 2002, Keyed-Hash Message Authentication Code (HMAC). This algorithm utilizes the Secure Hash Algorithms as an underlying primitive.

### Testing Requirements:

CST labs can test for conformance to the HMAC algorithm in FIPS 198. The testing requirements for these algorithms can be found in the document titled The Keyed-Hash Message Authentication Code (HMAC) Validation System (HMACVS). **Additional testing note: **All underlying SHA algorithm(s) supported by the HMAC implementation must be validated as part of the HMAC validation.

### Validation List:

NIST maintains the current HMAC Validation List.

### Test Vectors:

HMAC Test Vectors - These files provide an electronic version of the test vectors that can be used to informally verify the correctness of an HMAC algorithm implementation using the HMACVS.

## SP 800-108 Key Derivation Using Pseudorandom Functions - Key-Based - (KBKDF)

SP 800-108 dated October 2009, Recommendation for Key Derivation Using Pseudorandom Functions specifies techniques for the derivation of additional keying material from a secret key, either established through a key establishment scheme or shared through some other manner, using pseudorandom functions.

### Testing Requirements:

CST labs can test for conformance to the Key-based Key Derivation Functions (KBKDF) specified in Special Publication 800-108. The testing requirements for this algorithm can be found in the document titled The SP800-108 Key Derivation Function Validation System (KBKDFVS)..

**Additional testing note:** The KBKDF validation process requires additional prerequisite testing of the underlying CMAC and/or HMAC algorithm based on which MAC algorithm is supported and, the underlying algorithm used to generate the key derivation key (SP800-56A KAS, SP800-90A DRBG, and/or RNG). (See CAVP FAQ GEN.5 for more detailed information on prerequisites.)

### Validation List:

NIST maintains the current SP800-108 KBKDF Validation List. .

### Test Vectors:

KBKDF Test Vectors - These files provide an electronic version of the test vectors that can be used to informally verify the correctness of Key Derivation Functions (KDF) using Counter Mode, Feedback Mode, and/or Double-Pipeline Iteration Mode via the validation testing described in the KBKDFVS.

Test Vectors for SP 800-108 KDFs See the KBKDFVS document for an explanation of the files.

KDF in Counter Mode Test Vectors

KDF in Feedback Mode Test Vectors where no counter is used

KDF in Feedback Mode Test Vectors where zero length IV is allowed

KDF in Feedback Mode Test Vectors where zero length IV is not allowed

KDF in Double-Pipeline Iteration Mode Test Vectors where no counter is used

KDF in Double-Pipeline Iteration Mode Test Vectors where counter is used

## Algorithm Component Validation Testing

Beginning in 2011, the CAVP offers the validation of algorithm components. There exists an increased need for the testing of individual components of approved algorithms. Some examples of situations where algorithm component testing will be required includes PIV Smartcard applications, where there are processing limitations, and situations where parts of special publications can be used with components outside the special publication. The components for which we have validation testing are listed below.

### SP 800-56A Elliptic Curve Cryptography Cofactor Diffie-Hellman (ECC CDH) Primitive Testing

The testing of only the SP800-56A Section 5.7.1.2 *Elliptic Curve Cryptography Cofactor Diffie-Hellman (ECC CDH) Primitive*.

- NIST SP 800-56A ,
*Recommendation for Pair-Wise Key Establishment Schemes Using Discrete Logarithm Cryptography (Revised March 2007), Section 5.7.1.2*.

### Testing Requirements:

Validation testing for SP800-56A Section 5.7.1.2 ECC CDH Primitive component testing is handled by the Cryptographic Algorithm Validation Program's (CAVP) CST labs.

- ECC CDH Primitive tests are described in The Elliptic Curve Cryptography Cofactor Diffie_Hellman (ECC CDH) Primitive Validation System (ECC_CDHVS).

### Validation List:

NIST maintains the current Component Validation List. This CVL contains the validated implementations of the ECC CDH Primitive.

### Other Information:

- ECC CDH Primitive Test Vectors - This file provides an electronic version of the test vectors that can be used to informally verify the correctness of the SP 800-56A Section 5.7.1.2 ECC CDH Primitive component testing, using the validation tests described in The Elliptic Curve Cryptography Cofactor Diffie_Hellman (ECC CDH) Primitive Validation System (ECC_CDHVS).

### SP 800-135 Revision 1 Recommendation for Existing Application-Specific Key Derivation Functions

Validation testing for each individual key derivation function in NIST SP 800-135 (Revision 1) Recommendation for Existing Application-Specific Key Derivation Functions December 2011.

### Testing Requirements:

Validation testing for SP800-135 key derivation functions (KDF) component testing is handled by the Cryptographic Algorithm Validation Program's (CAVP) CST labs.

- SP800-135 validation tests are described in The SP800-135 Validation System).

### Validation List:

NIST maintains the current Component Validation List. This CVL contains the validated implementations of the KDFs described in SP800-135.

### Other Information:

The following files provide an electronic version of the test vectors that can be used to informally verify the correctness of the KDF algorithm implementation using the ASKDFVS. These values are properly formatted in response (.rsp) files. Vendor response files should match this format exactly. If applicable, files with intermediate results (.txt) are supplied for the tests to aid in debugging. Please refer to the readme.txt file located in the zip files below for detailed explanations.

- IKEv1 KDF Test Vectors
- IKEv2 KDF Test Vectors
- TLS KDF Test Vectors
- ANS X9.63-2001 KDF Test Vectors
- SSH KDF Test Vectors
- SRTP KDF Test Vectors
- SNMP KDF Test Vectors
- TPM KDF Test Vectors

### FIPS 186-3 ECDSA Signature Generation Component Testing

This component test assumes the IUT requires hash sized messages as input to the Signature Generation function. This validation test was designed for applications like the PIV card.

### Testing Requirements:

Validation testing for FIPS 186-3 ECDSA Signature Generation component testing is handled by the Cryptographic Algorithm Validation Program's (CAVP) CST labs.

- FIPS 186-3 ECDSA Signature Generation component testing is the same as ECDSA Signature Generation tests except the length of the input message is the length of the hash value supported. Please see the Signature Generation tests described in The Elliptic Curve Digital Signature Algorithm Validation System (ECDSA2VS).

### Validation List:

NIST maintains the current Component Validation List. This CVL contains the validated implementations of the FIPS 186-3 ECDSA Signature Generation Component Primitive Testing.

### Other Information:

- TO BE ADDED - FIPS 186-3 ECDSA Signature Generation Component Test Vectors - This file provides an electronic version of the test vectors that can be used to informally verify the correctness of the FIPS 186-3 Signature Generation component testing, using the validation tests described in The Elliptic Curve Digital Signature Algorithm Validation System (ECDSA2VS).

### FIPS 186-3 RSA PKCS1-v1_5 RSASP1 Signature Generation Component Testing

This component test tests the RSASP1 function as described in PKCS#1 v2.1:RSA Cryptography Standard, June 14,2002. This validation test was designed for applications like the PIV card.

### Testing Requirements:

Validation testing for FIPS 186-3 RSA PKCS1-v1_5 RSASP1 Signature Generation Component testing is handled by the Cryptographic Algorithm Validation Program's (CAVP) CST labs.

- FIPS 186-3 RSA PKCS1-v1_5 RSASP1 Signature Generation Component testing inputs messages in the encoded message EM format for PKCS1-v1_5. It returns the signature s.

### Validation List:

NIST maintains the current Component Validation List. This CVL contains the validated implementations of the FIPS 186-3 RSA PKCS1-v1_5 RSASP1 Signature Generation Component Testing.

### Other Information:

- TO BE ADDED - FIPS 186-3 RSA PKCS1-v1_5 RSASP1 Signature Generation Component Test Vectors - This file provides an electronic version of the test vectors that can be used to informally verify the correctness of the FIPS 186-3 Signature Generation component testing, using the validation tests described in The RSA PKCS1-v1_5 and RSA PKCS1-PSS RSASP1 Signature Generation Component Validation System (RSASP1VS) (TO BE ADDED.).

### FIPS 186-3 RSA PKCS1-vPSS RSASP1 Signature Generation Component Testing

This component test tests the RSASP1 function as described in PKCS#1 v2.1:RSA Cryptography Standard, June 14,2002. This validation test was designed for applications like the PIV card.

### Testing Requirements:

Validation testing for FIPS 186-3 RSA PKCS1-vPSS RSASP1 Signature Generation Component testing is handled by the Cryptographic Algorithm Validation Program's (CAVP) CST labs.

- FIPS 186-3 RSA PKCS1-v1_5 RSASP1 Signature Generation Component testing inputs messages in the encoded message EM format for PKCS1-vPSS. It returns the signature s verifying the correct result.

### Validation List:

NIST maintains the current Component Validation List. This CVL contains the validated implementations of the FIPS 186-3 RSA PKCS1-vPSS RSASP1 Signature Generation Component Testing.

### Other Information:

- TO BE ADDED - FIPS 186-3 RSA PKCS1-PSS RSASP1 Signature Generation Component Test Vectors - This file provides an electronic version of the test vectors that can be used to informally verify the correctness of the FIPS 186-3 Signature Generation component testing, using the validation tests described in The RSA PKCS1-v1_5 and RSA PKCS1-PSS RSASP1 Signature Generation Component Validation System (RSASP1VS) (TO BE ADDED.).

## Retired Validation Testing

### Data Encryption Standard (DES)

FIPS 46-3, Data Encryption Standard (DES), was withdrawn May 19, 2005 because the cryptographic algorithm no longer provided the security that is needed to protect Federal government information. DES is no longer an Approved algorithm. The DES Algorithm Validation Webpage is still accessible via the Validations List webpage, for historical purposes only.

### Data (Message) Authentication Code (MAC) and Key Management Using ANSI X9.17

The automated conformance tests for FIPS 113 and 171 are no longer operational. Currently, if a FIPS 140-1 or FIPS 140-2 cryptographic module implements either of these two standards, the CST testing laboratories perform some testing that these FIPS requirements are implemented correctly in the cryptographic module.

### Message Authentication Code (MAC), FIPS 113

The MAC Validation System (MVS) tested for compliance with FIPS 113, Computer Data Authentication. A list of validated products is maintained by the Security Technology Group.

### Key Management Using ANSI X9.17, FIPS 171

The Key Management Validation System (KMVS) tested for compliance with FIPS 171, Key Management Using ANSI X9.17. A list of validated products is maintained by the Security Technology Group.

CSRC Webmaster, Disclaimer Notice & Privacy Policy

NIST is an Agency of the U.S. Department of Commerce Last updated: July 19, 2012

Page created: January 28, 1996 </html